Free API API-SIEE Exam Dumps Questions & Answers

What tool is designed to measure mechanical oscillations?

• A.  Techometer
• B.  Oscilloscope
• C.  Vibration Meter
• D.  Spectroscope

According to API 541, subsequent to completion of manufacture and testing, the vendor shall revise and resubmit the previously supplied purchase data including all the following except:

• A.  operating manual.
• B.  shop test data.
• C.  as-built data sheet.
• D.  rotor-balance report.

The insulation requirement referred to in NEMA ICS 1 defines clearance as the shortest distance:

• A.  between the ground plane and the neutral conductor.
• B.  over the surface of an insulating material between two conducting parts.
• C.  a person can approach a live conductor without initiating a hazardous arcing incident.
• D.  measured through air between two conducting parts.

According to API 541, exterior surfaces, with the exception of machined surfaces or corrosion resistant material, shall be coated with which of the following?

• A.  Heavy shipping grease
• B.  Oil soluble rust preservative
• C.  Inorganic zinc
• D.  Vendor's standard paint

According to NEMA ICS 2, a provision for pad locking shall be provided:

• A.  on the door to prevent opening the combination starter door.
• B.  on the rear door of the low voltage motor control center.
• C.  on the external operating handle.
• D.  on the wireway to prevent opening the wireway on the motor control center.