Free Avaya 6101-1 Exam Dumps Questions & Answers

As stated in RFC 2338. (Virtual Router Redundancy Protocol) VRRP management problems can occur if the address used by the management station is used incorrectly.
Which two statements describe how to avoid management problems? (Choose two)

• A.  A VRRP interface MUST accept packets addressed to the IP address (es) associated with the virtual router if it is not the IP address owner (priority = 255)
• B.  A VRRP interface MUST NOT accepts packets addressed to the IP address (es) associated with the virtual router if it is the IP address owner. (Priority=255)
• C.  A VRRP interface MUST NOT accept packets addressed to the IP address (es) associated with the virtual router if it is not the IP address owner (priority = 255)
• D.  A VRRP interface MUST accept packets addressed to the IP address (es) associated with the virtual router if it is the IP address owner (priority = 255)

The exhibit indicates the two show commands from an edge Ethernet Routing Switch (ERS) 5520-24T-PWR an untagged frame arrives on port 10.which is configured as an access port
To which VLAN will the packet be forwarded?

• A.  All untagged packets will be placed in the default VLAN (VLAN 1).
• B.  All untagged packets will be placed in VLAN 31?
• C.  All untagged packets will he discarded.
• D.  All untagged packets will be placed in VLAN 311

A technician is configuring an Ethernet Routing Switch (ERS) 5520-24T for the edge of the Converged Campus network. in band communication to edge switch is a customer design requirement.
Which two VLANS are acceptable VLANs to use for the switch/stack IP addresses? (Choose two)

• A.  data
• B.  default
• C.  voice
• D.  management

What is the maximum number of Gigabit Ethernet ports on a single Ethernet Routing Switch (ERS) 8300 Input/Output module?

• A.  48
• B.  16
• C.  24
• D.  50

Consider the following deployment requirements
Support 40 100 Mb/s VoIP telephones, each with a power requirement of 6 Watt Support 40 directly connected 1000 Mb/s Ethernet workstations with UTP cable
Support four 1Gb/s Ethernet uplinks to the core switch using multimode fiber.
Which configuration is the minimum hardware required for an Ethernet Routing Switch (ERS) 8306 chassis that will support the above requirements?

• A.  Two 8348TX-PWR One 8393SF
• B.  Two 8348GTx-PWF One 8308XX One 8393SF
• C.  One 8348GTx One 8348Tx-PWF One 8308 XL One 8393SF
• D.  One 8348GTx One 8348Tx-PWR One 8393SF