Free Avaya 6103 Exam Dumps Questions & Answers

Which statement describes how to configure Simple Loop Prevention protocol (SLPP) Rx?

• A.  SLPP is configured on the edge switch ports that connect to the core switch cluster.
• B.  SLPP is configured on the Inter Switch Trunk (IST) ports of the core switch cluster.
• C.  SLPP is configured on the uplink ports of both the core switch cluster and the edge switch.
• D.  SLPP is configured on the core switch cluster ports that connect to the edge switch.

Within an STP enabled ERS 8000 switch, what will the vlan create <vid> name <vlan name> type port <instance_id> command create?

• A.  a protocol based VLAN
• B.  a port based VLAN
• C.  an ACL for a VLAN
• D.  a named VLAN

Using Enterprise Device Manager, the technician opens the ERS 8000 switch and sees that there are five ports showing with an orange light.
What does the orange light indicate?

• A.  The Ports are being tested.
• B.  The Ports have no link.
• C.  The Ports are in standby mode.
• D.  The Ports are manually disabled.

When configuring an Ethernet Routing Switch (ERS) 8000 for Split Multi Link Trunking (SMLT), protection against an edge switch in the factory default condition must be taken into consideration.
Which parameter will help prevent loops on the SMLT ports?

• A.  Enable Spanning Tree.
• B.  Enable LACP.
• C.  Discard Looped Frames.
• D.  Enable SLPP.

After a chassis failure, you replace the Avaya Ethernet Routing Switch 8800/8600 with a new chassis that has a new base MAC address. To transfer the existing license to this new chassis you must have the new base MAC address.
Which CLI command will show you the base MAC address of your new chassis?

• A.  info sys base-mac
• B.  display sys info
• C.  show sys base-mac
• D.  show sys-info