Free Avaya 7003-1 Exam Dumps Questions & Answers

A field calls about a problem enabling the DSPs on a new Communication Server (CS) 1000E SA Co-resident on release 7x. The DSPs on the MG 1 are all enabled but enabling the DSPs on MG2 and MG3 fail, and asked that the configuration be reviewed.
MG1: CPMG 128
MG2: MGC 128 DSP DB in position 2
MG3: MGC 128 DSP DB in position 2
After reviewing the configuration, an error in the DSP 128 VGW (DSP) configuration is identified?
Which configuration option accurately reflects the proper configuration for the voice Gateway (DSP) channel?

• A.  Numbering of VGW channels: 128 Trunk data block VGW Terminal number: 004 0 00 0 Designator field for trunk: DSP Extended trunk DSP DB 128 Customer number: 00
• B.  Numbering of VGW channels: 128 Trunk data block VGW Terminal number: 004 0 02 0 Designator field for trunk: DSP Extended trunk DSP DB 128 Customer number: 00
• C.  Numbering of VGW channels: 128 Trunk data block VGW Terminal number: 004 0 01 0 Designator field for trunk: DSP Extended trunk DSP DB 128 Customer number: 00
• D.  Numbering of VGW channels: 128 Trunk data block VGW Terminal number: 004 0 11 0 Designator field for trunk: DSP Extended trunk DSP DB 128 Customer number: 00

A customer has completed the security configuration for the security servers in the Avaya Aura integrated system. The System is using Avaya Aura System Manager as the Primary Security Server. The Customer is accessing the Base manager of each Server from the Element list to perform base configuration changes. Aaa Base Managers are accessible except the primary server; When Clicking on the Primary Server, the customer is taken to the System Manager Dashboard page.
What is the recommended course of action for the customer?

• A.  On the system Manager Console, access UCM Roles to change access Privileges.
• B.  No action is required; System Manager does not have an associated base Manager.
• C.  Log into the System Manager command to access Base Manager.
• D.  Log into Base Manager of the Primary Security server using local-login to access the Base Manager.

A technician is planning on upgrade of an option 11C 5 x system to a Communication Server (CS) 1000E Rls. 7 x System with CPMG Co-resident Call server and Media Gateway Controller.
To perform the Linux Base software installation on the CPMG which component is required?

• A.  External CDROM drive
• B.  Bootable Compact Flash (1 Gigabyte)
• C.  Bootable USB drive/disk (2 Gigabyte)
• D.  Bootable Compact Flash (2 Gigabyte)

A customer has successfully installed a Common Processor Media Gateway (CPMG) in a Communication Server (CS) 1000E system. The MGC has registered with the Call Server.
What is displayed on the CPMG LED display to confirm successful registration?

• A.  The MGC display will show Superloop and shelf number of MG 1000E
• B.  The MGC display will read "LOAD"
• C.  The MGC display will read "Exxx" (E000)
• D.  The MGC display will read "PASS"

A technician has installed the Linux base into a commercial of the shelf (COTS) server that will be configured as a Member Server. The Security Configuration is ready to be performed. All LAN connections are in place and functioning normally.
After connecting through a browser, what is the next step to perform the Security Configuration of this COTS Member server?

• A.  Enter the IP address of Primary Security server in the address bar of the browser.
• B.  Enter the IP address of the Certificate Authority in the address bar of the browser.
• C.  Enter the FQDN of the Primary Security server in the address bar of the browser.
• D.  Enter the FQDN of the COTS member server in the address bar of the browser.