Free Avaya 7003 Exam Dumps Questions & Answers

A customer purchased a new Communication Server 1000E SA system with five media gateways which includes:
MG 1: CPMG (Call Server, Signaling Server, Media Gateways Controller)
MG 2: Media Gateway Controller
MG 3: Media Gateway Controller
MG 4: Media Gateway Controller
MG 5: Media Gateway Controller
Which statement is true regarding the configuration of Media Gateway?

• A.  The Call Server and media gateway have different IP addresses.
• B.  The Call Server, Signaling Server, and Media Gateway have different IP addresses.
• C.  The Call Server, Signaling Server, and Media Gateway share the same ELAN IP address.
• D.  The Call Server and Media Gateway share the same ELAN IP address.

A customer has a Communication Server (CS) 1000Rls. 7x system and installing a stand- alone CPDC Signaling Server.
Which role should be chosen during the IP Telephony node Configuration?

• A.  Backup
• B.  Follower
• C.  Alternate
• D.  Leader

A technician on a Communication Server 1000E SA Rls. 7x cannot get a second media
Gateway to register with the Call Server. The call server and Media Gateway 1 sit in the same 19 inch rack while Media Gateway 2 is in another building and connected via the computer IP network Media Gateway 2 can ping the Call Server but cannot register. The network is suspected of having a firewall or port blocking issue.
Which diagnostic tool will help to isolate and identify a firewall or port blocking issue between the call server and Media Gateway 2?

• A.  Gryphon Tool
• B.  Linux PPP Tool
• C.  Packet Capture Tool
• D.  Linux Modem Configuration Tool

A customer with an existing Communication (CS) 1000E 6.0 system is upgrading to a CS
1000E Rls. 7x HA system. As a part of this upgrade, the CPPM Signaling Servers are being decommissioned and replaced with CPDC signaling servers.
Which two methods can be used to restore the original IP Telephony node configuration to the CS 1000E Rls. 7x HA system? (Choose two)

• A.  Import the original IP Telephone Node File the NRS database backup file
• B.  Import the original IP Telephone Node File using an XML from the CPPM Signaling
  Server.
• C.  Import the original IP Telephone Node File from the upgraded Call Servers database.
• D.  Import the original IP Telephone Node File from the upgraded Call Server database.

A customer has successfully installed a Common Processor Media Gateway (CPMG) in a
Communication Server (CS) 1000E system. The MGC has registered with the Call Server.
What is displayed on the CPMG LED display to confirm successful registration?

• A.  The MGC display will read "Exxx" (E000)
• B.  The MGC display will read "PASS"
• C.  The MGC display will read "LOAD"
• D.  The MGC display will show Superloop and shelf number of MG 1000E