Free Avaya 76940X Exam Dumps Questions & Answers

Which equipment is standard in a new ACP 4200 4.0?

• A.  VSP 7024
• B.  IP 8284
• C.  IP 7254
• D.  VSP 4850

To use the Management Server Console (MSC) as their time source, how would the engineer configure the ESXi hosts?

• A.  Login to the ESXi Hosts using the CLI, run the time_configuration.sh script.
• B.  Login to the MSC, run the time _configuration.bat script.
• C.  Login to vCenter server using the Web UI, set host > manage > Time configuration = IP address of the MSC.
• D.  Login to the MSC, set Services > Time configuration > NTP Clients = IP addresses of the ESXi hosts.

A customer called saying vMotion is not working as expected.
To determine the issue, what is the first thing you would try?

• A.  Shut down and restart both hosts.
• B.  Check all physical wiring.
• C.  Place both hosts in maintenance mode, then restart once completed.
• D.  From one of the Hosts, try to ping the vMotion VMKernel of the "Destination" Host.

While configuring the MSC to use NTP you see the NTP synching fail.
What is the most common cause of this problem?

• A.  VMware is not supporting NTP.
• B.  The NTP server is installed outside of the ACP 4200.
• C.  The VSPs are rejecting the NTP messages.
• D.  The customer has a firewall between the MSC and the customer's NTP server.

Refer to the exhibit.

When a support engineer navigates to Orchestrator's Rack View of an ACP 4200 system, the engineer notices that the V1-V6 slots on the right of the diagram are not populated.
What could be causing this problem?

• A.  V1-V6 are only used for ACP 100 systems.
• B.  V1-V6 are used to represent Vertical PDUs which are not present in this particular system.
• C.  V1-V6 are used to represent Virtual Machines which are not present in this particular system.
• D.  V1-V6 are used to represent G450 Media Modules which are not present in this particular system.