Free CWNP CWDP-302 Exam Dumps Questions & Answers

Given: For this fill-in the blank question, each answer option contains an answer for the first and second blanks, separated by a dash "-". Choose the answer option that correctly fills in both blanks in the following sentence.
A WLAN may use 802.11 admission control to ________, and admission control requirements are configured separately for each ________.

• A.  Regulate the available bandwidth resources - Access Category
• B.  Identify voice-enabled wireless devices - AP radio (that is, 2.4 GHz or 5 GHz)
• C.  Block stations with inadequate security parameters - SSID
• D.  Mark ingress and egress frames with priority values - TCP/IP port

Which one of the following devices are least likely to cause interference for multiple clients of an 802.11 WLAN?

• A.  Wireless video camera
• B.  Cellular network mobile hotspots
• C.  Bluetooth headset
• D.  Wireless HD video connection

You are configuring an 802.11ac AP using manual channel planning. The design specification calls for the current AP to be placed on channel 56 in 5 GHz and to disable the 2.4 GHz radio. For what could the 2.4 GHz radio be used if not standard AP operations?

• A.  Security monitoring
• B.  Controller-based channel assignment
• C.  Bluetooth access
• D.  PCI DSS encoding

During a post-deployment verification, you are requested to troubleshoot an area where users are experiencing poor throughput. They are using data communication only, mainly from laptops. You captured the frame showing an incorrect FCS. This frame is typical of those that were captured by the analyzer.
What does this frame reveal about the RF network in this area?

• A.  Multipath or excessive collisions seem to be an issue in this area
• B.  The AP seems to be too far to provide enough coverage to this area
• C.  Contention Free is in place in this network, which may starve some non-QoS stations from access
• D.  One station seems to be streaming video, thus may have reserved significant bandwidth via admission control

Which one of the following areas would introduce the greatest challenge in coverage when designing a WLAN?

• A.  outdoor park areas
• B.  standard office spaces
• C.  elevators
• D.  long hallways
• E.  conference rooms