Free CWNP CWDP-305 Exam Dumps Questions & Answers

When using a predictive design tool, you have selected APs with an antenna gain 3 dBi and set the transmit power of the predicted APs to 25 mW.
What should be EIRP of the APs in the design?

• A.  11 dBm
• B.  6.25 mW
• C.  17 dBm
• D.  125 mW

You have initiated a site survey to be performed and the team has been onsite and is halfway through gathering the necessary data.
The project sponsor just asked you to make sure the WLAN supports radio frequency identification (RFID) location tracking. How would you possibly characterize this situation?
Response:

• A.  Scope creep has occurred.
• B.  The 802.3af RTLS standard should be incorporated into the AP configuration.
• C.  The power requirements on the UPS need to be evaluated.
• D.  The 802.11g standard incorporates location tracking.
• E.  Any WLAN will support location tracking.

An AP vendor being considered for a WLAN deployment suggests that their 2 4 GHz and 5 GHz dual-band APs use software defined radios What unique capability does this indicate in comparison to non-software defined radios?

• A.  Software is used to configure the entire WLAN profile
• B.  At least one radio can be configured for either 2 4 GHz or 5 GHz operations
• C.  Software is used to configure the encryption settings
• D.  The radios can have their SSlDs configured through software

A controller-based WLAN infrastructure has its controller on a different subnet than its APs. What device must be used to enable any communication between the Controller and the APs?

• A.  NTP server
• B.  PoE Layer 2 switch
• C.  Wireless bridge
• D.  Router

For what types of systems should you request read-only access to in order to perform an analysis of the customer's existing infrastructure?(Choose all that apply.) Response:

• A.  RADIUS
• B.  Clients
• C.  Routers
• D.  Switches
• E.  Active Directory