Free Cisco 500-170 Exam Dumps Questions & Answers

Refer to the exhibit.

What would be the correct configuration for the ports labeled?

• A.  vlan 35fcoe vsan 45int eth1/31-32channel-group 15 mode activeint po15switchport mode trunkswitchport trunk allowed vlan 35switchport trunk allowed vsan 45spanning-tree port type edge trunkvsan databasevsan 45 interface po15
• B.  int eth1/31-32channel-group 15 mode activeint po15switchport mode access vsan 45vsan databasevsan 45 interface po15
• C.  vlan 35fcoe vsan 35int eth1/31channel-group 15 mode activeint eth 1/32channel-group 15 mode activeint portchannel15switchport mode trunkswitchport trunk allowed vlan 35spanning-tree port type edge trunkint vfc15bind interface po15switchport trunk allowed vsan 35vsan databasevsan 35 interface vfc15
• D.  vlan 35fcoe vsan 45int eth1/31-32channel-group 15 mode activeint po15switchport access vlan 35int vfc15bind interface po15switchport trunk allowed vsan 45vsan databasevsan 45 interface vfc15
• E.  int eth1/31channel-group 15 mode activeint eth 1/32channel-group 15 mode activeint po15switchport mode trunkswitchport trunk allowed vsan 45spanning-tree port type edge trunkvsan databasevsan 45 interface po15

Refer to the exhibit.

The numerals in the red rectangle, what will be this servers Boot from SAN order?

• A.  1, 2, 3, 4
• B.  1, 3, 2, 4
• C.  Not enough information
• D.  3, 4, 1, 2

Which Microsoft Hyper-V and System Center VMM feature allows for creation of multiple VM networks on top of a logical network and allows for tenant use of overlapping IP addresses?

• A.  VLAN-based configuration
• B.  Load Balancer Integration
• C.  Stateless Transport Protocol
• D.  Network Virtualization

Which presents a high level ordering of operations for installing VMware ESXi to the SAN-bootable LUN of a host?

• A.  Map ISO image file, reboot server, choose ESXi installer, Accept EULA, Choose NetApp LUN as installation disk, confirm root password, accept remove existing partitions warning and continue, unmap ESXI installation image, reboot
• B.  Map ISO image file, reboot server, choose ESXi installer, Accept EULA, Choose NetApp LUN as installation disk, confirm root password, reboot
• C.  Boot server, choose ESXi installer, Accept EULA, Choose NetApp LUN as installation disk, confirm root password, accept remove existing partitions warning and continue, reboot
• D.  Map ISO image file, choose ESXi installer, Accept EULA, choose local LSI storage device, confirm root password, unmap ESXi installation image, reboot

Refer to the exhibit.

Following FlexPod recommended practices, which portchannel configuration is valid for the connectivity shown?

• A.  A and B. portchannel 1C and D. po2 and vpc 2E and F. po3 and vpc 3G and H. portchannel 4I and J. po11 and vpc 11K and L. po12 and vpc 12
• B.  A and vpc 1C and E. po2 and vpc 2D and F. po3 and vpc 3G and H. vpc 4I and K. po11 and vpc 11J and L. po12 and vpc 12
• C.  A and B. portchannel 1C and E. po2 and vpc 2D and F. po3 and vpc 3G and H. portchannel 1I and K. po11 and vpc 11J and L. po12 and vpc 12
• D.  A and B. portchannel 1C and vpc 2E and F. vpc 2G and H. portchannel 4I and J. vpc 11K and L. vpc 11
• E.  A and B. po1 and vpc 1C and D. po2 and vpc 2E and F. po3 and vpc 3G and H. po4 and vpc 4I and J. po11 and vpc 11K and L. po12 and vpc 12