Free Cisco 642-732 Exam Dumps Questions & Answers

Which three things do you need to consider prior to performing a wireless site survey? (Choose three.)

• A.  The time required to assess application server locations at the customer facility.
• B.  The time required to survey each potential AP location.
• C.  The type of wireless survey tools required to perform the site survey.
• D.  The time required to utilize the design mode in Cisco WCS to prepare a preliminary WLAN design to reduce on-site survey time.
• E.  The time required to assess customer WLAN density and throughput requirements.
• F.  The time required to acquire any additional infrastructure components.

Refer to the exhibit. A company requires a multi-point bridge solution with Cisco 1400 series bridges. The central bridge (B1) is set to 10 dBm, the manufacturing remote bridge (B2) is set to 20 dBm, the inventory remote bridge (B3) is set to 20 dBm, and the shop remote bridge (B4) is set to 10 dBm. What is the maximum allowed power setting for all four bridges?

• A.  B1=12dBmB2=12dBmB3=12dBmB4=12dBm
• B.  B1=12dBmB2=24dBmB3=24dBmB4=24dBm
• C.  B1=24dBmB2=12dBmB3=12dBmB4=12dBm
• D.  B1=10dBmB2=24dBmB3=24dBmB4=24dBm
• E.  B1=20dBmB2=20dBmB3=20dBmB4=20dBm
• F.  B1=24dBmB2=24dBmB3=24dBmB4=24dBm

An engineer installed a 1252 AP and is getting power from the switch. However, devices connected to the wireless network cannot get 802.11n data rates. What supported switchport protocol or standard could be the reason for this?

• A.  802.3af
• B.  802.1p
• C.  802.3at
• D.  802.11e

An engineer is deploying an outdoor Mesh network. What are the four major factors that should be considered? (Choose four.)

• A.  power lines
• B.  power
• C.  network connectivity
• D.  line of sight
• E.  buildings
• F.  traffic lights
• G.  satellite dishes
• H.  mounting

You have been asked to evaluate a deployed version 7.0 controller based WLAN, which includes a Cisco WCS and an MSE3310. Currently, the customer has a approximately 1900 clients and 300 RFID tags. The customer is complaining of problems tracking clients and RFID tags. What can be done to correct this problem?

• A.  Replace the MSE3310 with a MSE3355 and increase the wIPS license.
• B.  Increase the Context-Aware license on the MSE3310.
• C.  Replace the MSE3310 with a MSE3355 and increase the Context-Aware license.
• D.  Decrease the wIPS license on the MSE3310.
• E.  Increase the wIPS license on the MSE3310.