Free F5 301a Exam Dumps Questions & Answers

An application requires load balancing functionality. The application must be encrypted to the client.
Certain content must be manipulated by the following IRule:

Which set of profiles must be applied to the virtual server?

• A.  Fast L4, HTTP server SSL Stream
• B.  TCP, HTTP, Client SSL, Stream
• C.  TCP, HTTP server SSL Stream
• D.  TCP, HTTP, OnceConnect, Stream

An LTM device provides load balancing to a web application? The LTM device has two dual-core processors and a licensed SSL Transactions Per Second (TPS) limit of 500 CMP is enabled. TLS connections are used between client systems and virtual servers on the LTM device, as well as from the LTM device to servers used as part of LTM pool. TLS enabled virtual servers utilize certificates based on 2048-bit keys.
During a peak period. 2560 new TLS transactions per second are attempted to the web application via the LTM device.
What will happen in this scenario?

• A.  Nothing: 2560 TLS transactions per second is within the SSI TPS license limit.
• B.  560 new TLS transactions will be silently discarded due to the SSL TPS license limit
• C.  Nothing: TLS transactions per second are NOT affected by an SSL TPS license limit
• D.  2060 new TLS transactions will be silently discarded due to the SSL TPS license limit

An LTM Specialist needs to create an iRule that creates persistence records based on a JSESSIONID cookie. If a persistence record already exists, then the iRule must persist the client connection according to the existing record.
Which persistence profile enables the iRule to meet these requirements?

• A.  Source Address Affinity
• B.  SSL
• C.  Cookie
• D.  Destination Address Affinity
• E.  Universal

An TLM Specialist needs to configure a virtual server to terminate SSL connection on the LTM device.
Cryptographic information must be re-authorized for SSL sessions that remain open for longer than 30 seconds.
Which settings should the LTM Specialist configure in the client SSL profile?

• A.  set the Handshake Timeout to 30 seconds
• B.  enable Require Peer SN1 Support
• C.  set the Renegotiate Max Record Delay to 30
• D.  set the Renegotiate Period to 30 seconds

An LTM Specialist needs to apply SNAT using currently used SNAT pool to a new virtual server.
What needs to be completed before applying that configuration change?

• A.  Review connection for the selected SNAT pool and enlarge it if appropriate
• B.  Verify that the IP address of the SNAT pool are in the same VLAN as the pool members.
• C.  Verify that the IP address of the SNAT pool are in the same subnet as the pool members
• D.  Make sure that the BIG-IP device is NOT operating under heavy load during peak times