Free F5 F50-531 Exam Dumps Questions & Answers

You need to terminate client SSL traffic at the BIG-IP and also to persist client traffic to the same pool member based on a BIG-IP supplied cookie. Which four are profiles that would normally be included in the virtual server's definition? (Choose four.)

• A.  Cookie-Based Persistence
• B.  HTTP
• C.  TCP
• D.  ServerSSL
• E.  HTTPS
• F.  ClientSSL

Where is connection mirroring configured?

• A.  It is an optional feature of each virtual server.
• B.  It an option within a TCP profile.
• C.  It is not configured; it is default behavior.
• D.  It is an optional feature of each pool.

Assuming other fail-over settings are at their default state, what would occur if the fail-over cable were to be disconnected for five seconds and then reconnected?

• A.  When the cable is disconnected, both systems will become active. When the voltage is restored, both systems will maintain active mode.
• B.  Nothing. Fail-over due to loss of voltage will not occur if the voltage is lost for less than ten seconds.
• C.  As long as network communication is not lost, no change will occur.
• D.  When the cable is disconnected, both systems will become active. When the voltage is restored, unit two will revert to standby mode.

Assume a BIG-IP has no NATs or SNATs configured. Which two scenarios are possible when client traffic arrives on a BIG-IP that is NOT destined to a self-IP? (Choose two.)

• A.  If the destination of the traffic does not match a virtual server, the traffic will be forwarded based on routing tables.
• B.  If the destination of the traffic matches a virtual server, the traffic will be processed per the virtual server definition.
• C.  If the destination of the traffic does not match a virtual server, the traffic will be discarded.
• D.  If the destination of the traffic matches a virtual server, the traffic will be forwarded, but it cannot be load-balanced since no SNAT has been configured.

Which parameters are set to the same value when a pair of BIG-IP devices are synchronized?

• A.  profile definitions
• B.  VLAN fail-safe settings
• C.  system clocks
• D.  host names
• E.  MAC masquerade addresses