Free F5 F5CAB1 Exam Dumps Questions & Answers

The Configuration Utility of a BIG-IP device is currently accessible via its management IP
10.53.1.245 from all VLANs.
The BIG-IP Administrator needs to restrict access so only hosts from the 10.0.0.0/24 subnet can access the Configuration Utility.
Which TMSH command accomplishes this?

• A.  (tmos)# create /net acl MGMT.HTTP rule add { (permit tcp 10.0.0.0/24 10.53.1.245 http) (deny ip any any http) }
• B.  (tmos)# create /net acl MGMT.HTTP rule add { (permit tcp 10.0.0.0 0.0.0.255 host 10.53.1.245
  http) }
• C.  (tmos)# modify /sys httpd allow replace-all-with {10.0.0.0/24}
• D.  (tmos)# modify /ltm httpd allow replace-all-with {10.0.0.0/24}

Refer to the exhibit.

An organization has purchased a BIG-IP license that includes all available modules but has chosen to provision only the modules they require.
The exhibit displays the current resource allocation from the System -> Resource Provisioning page.
Based on the information provided, which F5 modules have been provisioned?

• A.  DNS, APM
• B.  LTM, APM
• C.  LTM, DNS, APM
• D.  TMM, DNS, APS

What is the default IP address of a newly installed BIG-IP system?

• A.  192.168.0.1
• B.  192.168.100.1
• C.  192.168.1.245
• D.  10.0.0.1

What is the purpose of a Virtual Server in BIG-IP?

• A.  It defines a failover mechanism for the system
• B.  It handles the routing of traffic to back-end servers
• C.  It defines how SSL certificates are managed
• D.  It is used to configure the Self-IP

What is required when setting up an HA (High Availability) pair of BIG-IP devices?

• A.  Configuration of load balancing on both devices
• B.  Different software versions on each device
• C.  Same hardware model and version of software
• D.  Same IP address on both devices