Free HP HP2-Z37 Exam Dumps Questions & Answers

A network administrator is planning to add redundant links to a topology with HP Provision switches. What correctly describes the default support for spanning tree?

• A.  Spanning tree is enabled and operating in MSTP mode.
• B.  Spanning tree is disabled.
• C.  Spanning tree is enabled and operating in RSTP mode.
• D.  Spanning tree is enabled and operating in PVST mode.

A network administrator is setting up Rapid Spanning Tree Protocol (RSTP) on several HP Provision switches. Currently, the switches are using the default spanning tree settings. How can the administrator ensure that Switch-1 becomes root?

• A.  Set bridge priority 15 on Switch-1.
• B.  Set bridge priority 0 on Switch-1.
• C.  Set spanning tree costs of 15 of all the Switch-1 ports.
• D.  Set spanning tree costs of 0 of all the Switch-1 ports.

A network administrator wants to configure an HP Provision switch from a menu interface. How can the administrator access this interface?

• A.  Access the Web interface to use the switch menu.
• B.  Access the boot ROM console and select the option for the menu interface.
• C.  Access the switch CLI and use the menu command.
• D.  Access the switch CLI and set the menu attribute for the user.

Refer to the exhibit.

A network administrator is setting up a single Multiple Spanning Tree Protocol (MSTP) region onHPComware switches. Switch-1 should be root for instance 1, and Switch-2 should be the root for instance 2. The administrator has already configured the MSTP region on Switch-1, and the priorities on both switches.
Which region settings should the administrator configure on Switch-2?

• A.  Region name = mycompany; revision number = 1; Instance 1 = 21-30; Instance 2 = 1120
• B.  Region name = mycompany; revision number = 1; Instance 1 = 11-20; Instance 2 = 2130
• C.  Region name = mycompany; revision number = 0; Instance 1 = 21-30; Instance 2 = 1120
• D.  Region name = mycompany; revision number = 0; Instance 1 = 11-20; Instance 2 = 2130

Refer to the exhibit.

A network administrator wants to delete VLAN 10 from a switch and enters this command:
Switch (config) # no vlan 10
The administrator then presses y after the warning. What happens?

• A.  Ports 3 and 4 receive an untagged VLAN assignment in VLAN 1.
• B.  Ports 3 and 4 are disabled until the network administrator gives the ports a valid VLAN assignment.
• C.  Ports 3 and 4 have an invalid VLAN assignment, so they cannot transmit or receive traffic.
• D.  Ports 3 and 4 receive an untagged VLAN assignment in the VLAN configured as the Primary VLAN.