Free HP HPE0-S22 Exam Dumps Questions & Answers

An architect is proposing an HPE Moonshot System, including m710 cartridges, an iLO Chassis Manager, switch, and uplink modules. The customer needs IT staff to be able to access cartridges over a Remote console.
What should the architect explain to the customer?

• A.  Remote Console access is not supported for cartridges; IT staff should use local consoles instead.
• B.  IT staff can open a Remote Console to any cartridge through the iLO CM.
• C.  Remote Console access is only supported when a cartridge is part of an HPE Helion CloudSystem 9.x solution.
• D.  IT staff can open a Remote Console to any cartridge linked to an mRCA through the iLO CM.

An architect is developing a proof of concept (PoC) for an HPE Apollo 6000 solution. The architect needs to monitor CPU, memory, disk IO, and network IO utilization while running the customer application.
Which HPE solution can the architect use for this monitoring?

• A.  HPE OneView 2.0
• B.  HPE Insight Cluster Management Utility (CMU)
• C.  HPE Apollo Management Module
• D.  HPE Advanced Power Management (APM)

An architect is planning an HPE Moonshot solution with m710p cartridges. The customer's application requires cartridge nodes to connect to a NAS. The customer's current infrastructure supports 10GbE. In the future, the customer plans to upgrade the fabric between the HPE Moonshot and the NAS solution to support 40GbE.
Which switch modules and uplink modules should the architect recommend to meet both the current and future needs?

• A.  HPE Moonshot 45XGc Switch Modules and HPE Moonshot 4-QSFP+ Uplink Modules
• B.  HPE Moonshot 45XG Switch Modules and HPE Moonshot 16-SPF+ Uplink Modules
• C.  HPE Moonshot 180G Switch Modules and HPE Moonshot 16-SFP+ Uplink Modules
• D.  HPE Moonshot 180G Switch Modules and HPE Moonshot 4-QPPF+ Uplink Modules

When designing a Superdome X configuration for a customer, which storage configuration should the architect choose?

• A.  one mezzanine FC port on one nPar dedicated for booting from an MSA 2040 and an additional FC port for user data
• B.  booting from a local direct attached SSD disk and a mezzanine TOE N/W port for user data accessing an MSA 2040 using iSCSI
• C.  booting from a local direct attached SSD disk and a mezzanine FC port for user data storage on an MSA 2040
• D.  a single mezzanine FC port in each nPar for common access to all volumes on an HPE 3PAR StoreServ

How does the HPE c7000 BladeSystem's use of network infrastructure compare with the HPE Apollo 6000's?

• A.  The HPE Apollo 6000 uses fewer network ports per server.
• B.  The HPE c7000 BladeSystem offers greater port consolidation.
• C.  The HPE Apollo 6000 offers greater per server connectivity.
• D.  The HPE c7000 BladeSystem offers less port variety.