Free HP HPE7-A06 Exam Dumps Questions & Answers

A bgp routing table contains multiple routes to the same destination prefix. Referring to the table below, which route would be marked with a ">" symbol?

• A.  D
• B.  A
• C.  C
• D.  B

A user can connect to the wired network using 802.1X EAP-TLS but their traffic is being dropped after a certain time. What is the most likely cause of the traffic being dropped. (Choose two.)

• A.  The user's device is not configured to use the correct gateway.
• B.  The user's device is using the wrong MAC address.
• C.  The user's device is not assigned to the correct role in HPE Aruba Networking ClearPass Policy Manager.
• D.  The user's device is not configured to use the correct DNS servers.
• E.  A firewall is blocking traffic between the user's device and the resources they are trying to access.

A gateway cluster with AOS-10 is managed by HPE Aruba Networking Central. In a failover, what is the expected behavior of the client traffic?

• A.  Client traffic is disrupted during the AP bootstrap.
• B.  Client state synchronization is supported on the first failover.
• C.  Client state synchronization is supported on each failover.
• D.  Client IPv4 multicast session failover is not supported.

Refer to the exhibit.

An end-to-end QoS design needs to be implemented for wired and wireless.
What is needed on the LAN side to maintain the correct DSCP tags?

• A.  to create a WMM to DSCP mapping on the LAN Edge
• B.  to create a customer DSCP mapping as WLAN DSCP values are different
• C.  to create a WMM to DSCP mapping on the WLAN side
• D.  to trust all DSCP-marked packets in the QoS interior ports

You are configuring an SSID that is using PSK as a security mechanism. Why should you use WPA3-Personal with WPA3 Transition Mode disabled?

• A.  WPA3-Personal with Transition Mode disabled is optional for 6 GHz-enabled networks as there is a built-in fallback to 5 GHz mode with WPA2.
• B.  WPA3-Personal with Transition Mode disabled is mandatory for 5 GHz-enabled networks.
• C.  WPA3-Personal with Transition Mode disabled is mandatory for 6 GHz-enabled networks.
• D.  WPA3-Personal with Transition Mode disabled should be used to prevent legacy clients from connecting to the network.