Free IBM 000-109 Exam Dumps Questions & Answers

A second virtual disk has been added to a SuSE Linux LPAR on the existing vhost0 adapter. What must be done for this disk to be recognized on the Linux LPAR?

• A.  /usr/bin/rescan-scsi-bus
• B.  echo "- - -" > /sys/class/scsi_host/host0/scan
• C.  /usr/bin/cfgmgr
• D.  /bin/kpartx -a -v /dev/sdb

What is necessary to install and configure IVM to use the network interface?

• A.  A private IP address
• B.  A serial connection
• C.  SSH Key Manager
• D.  The IBM HTTP Server

Which of the following are valid outbound communication methods for Call Home using an HMC?

• A.  SMTP Gateway connection VPN connection Local Modem
• B.  SSL Internet connection VPN connection SNMP Gateway connection
• C.  SMTP Gateway connection Local Modem SSL Internet connection
• D.  Local Modem VPN connection SSL Internet connection

A customer has a VIO server which runs on internal disks. It can not support an outage during normal business hours. Which action can the administrator take that will support this requirement AND improve overall system availability?

• A.  Use the -P flag when setting disk quorum.
• B.  Use the -immed option when creating a hot spare disk.
• C.  Use the -defer option when mirroring the rootvg.
• D.  Use the -D flag when creating a backup device.

An administrator tries to dynamically increase the processor capacity entitlement of LPAR1 from 1.0 to 2.0. The current entitlement is 1.0 and the maximum is set to 3.0.
The operation fails. When the administrator adds up the number of processors in use by the currently running LPARs, there are 4 processors available. The administrator also notes that LPAR2 is inactive.
What is the cause of this failure?

• A.  LPAR1 has "Allow when partition active" in the Processor Sharing section NOT CHECKED in its profile
• B.  LPAR2 has "Allow when partition inactive" in the Processor Sharing section CHECKED in its profile
• C.  LPAR1 has "Allow when partition active" in the Processor Sharing section CHECKED in its profile
• D.  LPAR2 has "Allow when partition inactive" in the Processor Sharing section NOT CHECKED in its profile