Free International Code Council M2 Exam Dumps Questions & Answers

The minimum rise required for a 10-foot run of vent connector is _____ inches.

• A.  1-1/2
• B.  1-1/4
• C.  2-1/2
• D.  2

Solid-fuel cooking equipment:

• A.  is permitted to be installed under Type II noncanopy-type hoods.
• B.  is permitted to be installed under Type II canopy-type hoods.
• C.  is permitted to be installed under common canopy-type hoods with other cooking equipment.
• D.  shall be vented through a separate hood and exhaust system.

Why are two or more sets of construction documents, engineering calculations, diagrams, and other data required to be submitted with each application for a permit?

• A.  All sets are to be retained by the code official in order to have a spare set of construction documents for use by any subcontractors.
• B.  To ensure that the project is completed in a timely manner.
• C.  All sets of documents are to be kept by the code official, and at least one set will serve as a backup set of documents in case the other is lost or misplaced.
• D.  One set will be retained by the code official, and the other will be returned to the applicant and kept on the job site for reference while construction is in progress.

Given: The listed clearance is 12 inches.

What would be the reduced clearance to combustibles, in inches, if the millboard is replaced with 24-gauge sheet metal?

• A.  4
• B.  3
• C.  6
• D.  2

Air mechanically exhausted from a room must be:

• A.  recirculated.
• B.  discharged to the outdoors.
• C.  filtered.
• D.  discharged into the attic.