Free Juniper JN0-660 Exam Dumps Questions & Answers

Which neighbor state indicates that two BGP neighbors have full connectivity?

• A.  Open Confirm
• B.  Established
• C.  Connect
• D.  Idle

Click the Exhibit button.

Based on the configuration shown in the exhibit, which two statements are correct? (Choose two.)

• A.  The secondary path is only signaled if the primary path fails.
• B.  The LSP will not revert back to the primary path until the session is cleared.
• C.  The secondary path is signaled and in standby mode.
• D.  The LSP will revert back to the primary path when it becomes available.

In an interdomain multicast deployment scenario, an RP1 is in AS1 and an RP2 is in AS2. MSDP is configured between RP1 and RP2.In which routing table on RP1 are source-active messages (SAs) received from RP2 by default?

• A.  inet.4
• B.  inet.2
• C.  inet.1
• D.  inet.0

Your OSPF network includes an NSSA. Which LSA type is injected into the NSSA by the ASBR?

• A.  Type 5
• B.  Type 9
• C.  Type 3
• D.  Type 7

-- Exhibit -

-- Exhibit --
Click the Exhibit button.
In the exhibit, R2 is receiving external routing information for the 192.168.16.0/24 prefix and is redistributing it into IS-IS. R1 has a policy that leaks the 192.168.16.0/24 route into Area 49.1111. R3 has a policy that leaks the 192.168.16.0/24 route into Area 49.2222. However, the IS-IS version of the route does not appear in R2's routing table.
Why does R3's route leaking policy appear not to be working?

• A.  The Up/Down bit is set to down for the prefix.
• B.  You can only leak routes from Level 2 to Level 1.
• C.  R2 already has better routing information for the prefix.
• D.  The external flag is set for the prefix.