Free NACE NACE-CIP2-001 Exam Dumps Questions & Answers

You are the NACE Coating Inspector on a tank lining project and are asked to perform a high voltage holiday test after the coating applicators have completed their final repairs. After meeting all the confined space entry permit you enter the tank and notice a very strong odor of solvent.
Your first course of action should to:

• A.  Investigate to find the source of the odor
• B.  Exit the tank and immediately and report the problem to the nearest safety supervisor
• C.  Exit the tank and document the incident in your daily report
• D.  Don your air supplied respirator and continue the testing

When environmental enclosures are being used an inspector needs to be concerned about:

• A.  Structural integrity
• B.  Lighting
• C.  a), b), and c)
• D.  Air changes

The coating applicator has ignored a enface preparation hold point and applied coating over the surface without a sign off from you as the inspector.
Your FIRST preferred course of action is to:

• A.  Ignore the situation
• B.  Advise the Owner and write a Non-Conformance report
• C.  Stop the job
• D.  Require the Applicator to remove the coating

It is always possible to see moisture on a steel substrate:

• A.  False
• B.  True

In powder coatings, when the particles of powder begin to flow but are not fully liquid, they are in what stage?

• A.  Gel stage
• B.  Wetting stage
• C.  Cure stage
• D.  Flow stage