Free Network Appliance NS0-509 Exam Dumps Questions & Answers

An administrator wants to design an NVMe solution to connect Linux hosts to an ONTAP cluster. The proposed solution uses two Cisco MDS 9396T switches for each fabric in a top-of-rack design.
In this scenario, which statement is true?

• A.  NVMe solutions require heterogeneous multiple switch fabrics.
• B.  N_Port ID virtualization (NPIV) must be enabled on all switches.
• C.  Asymmetric Namespace Access requires ONTAP 9.4 and higher.
• D.  A middle-of-rack design is required.

You need to configure iSCSI on your existing ONTAP cluster in a new SVM. The iSCSI LUNs will be served over a new Layer 2 network using the same physical ports that also use the CIFS protocol on a different SVM.
Which two actions should you perform to accomplish this task? (Choose two.)

• A.  Create a new AD object.
• B.  Create a new broadcast domain.
• C.  Create a new portset.
• D.  Create a new VLAN.

You have a 4 node cluster with an AFF A300 HA pair and a FAS8200 HA pair. You plan on using the default storage efficiency settings. With inline data compaction, you estimate that you can save 6% of storage space. AFF A300 LUNs that use under 5000 IOPS are moved to a FAS8200 using the lun move command.
In this scenario, what happens to the data after the LUN is moved? (Choose two.)

• A.  The existing data is not compacted.
• B.  The new written data is compacted.
• C.  The new written data is not compacted.
• D.  The existing data is compacted.

A customer has an FC host that needs to be attached to the NetApp AFF A700 dual controller storage cluster.
To accomplish this task, which three steps should the customer perform? (Choose three.)

• A.  Configure the FCP service for the node that has the LUN that is being accessed.
• B.  Confirm that the switch firmware is supported according to the Interoperability Matrix Tool (IMT).
• C.  Configure portsets to support the availability of multiple paths.
• D.  Confirm that the FC HBA driver and firmware is supported according to the Interoperability Matrix Tool (IMT)
• E.  Configure an igroup with the WWPN from the host initiator for LUN access.

You currently have a FAS8200 with ONTAP 9.5. You want to expand the front end FC I/O capabilities. However, you are unsure which target adapters are supported.
What would you use to confirm which adapters are supported with your current configuration?

• A.  Hardware Universe (HWU)
• B.  OneCollect
• C.  Interoperability Matrix Tool (IMT)
• D.  Upgrade Advisor