Free Oracle 1z0-489 Exam Dumps Questions & Answers

Using the SP ILOM commands to list properties, which command would you use to find out the mapping for all CMU boards in physical Domain 1 to the CPUs?

• A.  show / Servers/Pdomains/Pdomain_l/DCUs -level 3 location
• B.  show /Servers/Pdomains/Pdomain_l/SP/Processors -level 2 location f
• C.  show /System/Processors/C PUs -level 2 location
• D.  show /Servers/Pdomains/Pdomain.l/System/Processors -level 3 location

Which two statements are true according to Enterprise Installation Stan (EIS) regarding boot disk layout?

• A.  For ZFS-based root file systems, EIS recommends you do not use H/W RAID 1 unless sufficient disks are available for ZFS to mirror itself.
• B.  For ZFS-based root file systems, EIS recommends you do not use H/W RAID 0 unless sufficientdisks are available for ZFS to mirror itself.
• C.  For UFS-based root file systems, EIS recommends that H/W RAID 0 be used to mirror the bootdisk wherever it is available.
• D.  Under ZFS, the boot devices/disks are placed in a ZFS poof (called rpool by default), and all datasets (consisting of file systems and volumes) are allocated flexibly from that pool.

You run the following command:
-> sec /HOSTO/bootmode script="setenv auto-boot? False"
You notice on subsequent resets that Solaris boots in the domain. What are three possible reasons for this?

• A.  Keyswitch is set to Normal.
• B.  The default setting for auto-boot? is True.
• C.  auto-boot? returns to its default setting at the next reset.
• D.  This is a one-time setting.
• E.  Keyswitch is set to Locked.

While planning for the installation of a SPARC M5-32 server, you notice that a more recent version of a patch is available than what is currently on the EIS-DVD. According to the Enterprise Installation Standard (EIS) methodology, what should you do?

• A.  Do not install the patch unless instructed to do so by an EIS Alert.
• B.  Never install patches outside of the EIS- DV
• C.  Always install the most recent version of patch.
• D.  Delay installation until the updated patch is published to the EIS-DVD.

Which three options are memory population rules of the SPARC M5-32 server when mixing DIMMs?

• A.  Mix different DIMM sizes on different CMU boards in the same DCU.
• B.  Mixing of different DIMM sizes is allowed, as long as homogeneous types are populated per CPUsocket.
• C.  Populate each CMU with DIMMs of the same size or rank.
• D.  When mixing DIMMs, large-sized DIMMs need to be put in position 0, 1, 2, or 3.
• E.  DIMMs in the same position (0, 1, 2, or 3) within a CMU must be homogeneous (that is, the sametype, same dram capacity, and same rank).