Free Supermicro SMI300XE Exam Dumps Questions & Answers

If you need to replace a failed GPU in an MI300X system, what must you do to gain access to the GPUs in the system?

• A.  Update the AMD command.
• B.  Configure the SCC.
• C.  Remove the GPU tray.
• D.  Use the LSPCI command.

Which SUM command is used to check basic system information?

• A.  sum.exe -ip 10.1.1.100 -user ADMIN -pass ADMIN -command checksysteminfo
• B.  sum.exe call system information
• C.  sum.exe -i 10.1.1.100 -p ADMIN -u ADMIN -c checkbasicinfo
• D.  sum.exe -I 10.1.1.100 -u ADMIN -p ADMIN -c checkassetinfo

When removing the GPU tray, where are the two screws located that must be loosened to allow the handles to be pulled out/down?

• A.  Bottom of the GPU tray
• B.  One on each side of the GPU tray
• C.  Top of the GPU tray
• D.  One on top and one on bottom of the GPU tray

What will happen when you pull the GPU tray out partially?

• A.  The tray will start becoming very hot.
• B.  The tray will lock to prevent it from pulling too fast, and 1 person on each side of the tray needs to press down on the lever to unlock it.
• C.  The tray will vibrate three times, alerting the user that it is released from the rail mechanism and is ready to be lifted, then start flashing a red light.
• D.  The tray will start spewing liquid everywhere.

When working on the GPU tray, where should you place it to ensure a safe work environment?

• A.  A flat surface
• B.  On the floor where everyone is walking by
• C.  On a cardboard box that may or may not support the weight of the tray
• D.  On top of the chassis