Join the discussion
Question 1/101
For what purposes are VPNs typically used in modern WLANs?(Choose all that apply.) Response:
Correct Answer: C,E
Add Comments
- Other Question (101q)
- Q1. For what purposes are VPNs typically used in modern WLANs?(Choose all that apply.) Respons...
- Q2. When viewing channel utilization information from a protocol analyzer, if high channel uti...
- Q3. After successfully deploying and validating a WLAN intra structure, who should be trained ...
- Q4. In what circumstance would you not enable DFS channels on a WLAN infrastructure?...
- Q5. What statements are true regarding jitter and latency?(Choose all that apply.) Response:...
- Q6. ABC Company has a WLAN controller with 10 controller-based APs; the Voice SSID is configur...
- Q7. When designing a new WLAN infrastructure you also need to be aware of now the network is p...
- Q8. When surveying an existing WLAN infrastructure for a possible redesign, you use two Wi-Fi ...
- Q9. Which DHCP option, when required, should be configured and enabled to help APs locate thei...
- Q10. You have designed a WLAN with a plan for 87 APs m a large office building. The customer ha...
- Q11. Given: In your regulatory domain, a Tx Power Level of "1" is equivalent to 17 dBm. For eve...
- Q12. If radar has reportedly been detected on your WLAN deployment, what bands would you consid...
- Q13. When selecting a centralized WLAN architecture, what new problem may arise when you change...
- Q14. When designing for a PTP outdoor link, what important consideration should be made about l...
- Q15. When performing a spectrum analysis walkthrough of a facility tor which you will be creati...
- Q16. During lunch time in the break room of a company, Wi-Fi connectivity on the 2.4 GHz band i...
- Q17. An organization is implementing a new WLAN. They are upgrading a very old 802.11g network ...
- Q18. What service must be implemented on your customers' network to authenticate users against ...
- Q19. In most WLAN design tools, after defining project parameters or during the project creatio...
- Q20. What functions may be performed by a WIPS?(Choose all that apply.)...
- Q21. During a validation site survey, you realize that the installers mounted some of the APs o...
- Q22. What part of the 802.11n preamble is used by the receiver to estimate the spatially multip...
- Q23. SSID hiding is not generally recommended because some frames require inclusion of the SSID...
- Q24. When you see the SKINNY protocol in a post-install validation protocol capture, what does ...
- Q25. What are some advantages of designing guest access with all guest users tunneled directly ...
- Q26. To ensure that your design meets the requirements of the WLAN, what should be defined in y...
- Q27. Given: In a site survey deliverable report, you are expected to explain the spectrum measu...
- Q28. When you see the SKINNY protocol in a post-install validation protocol capture, what does ...
- Q29. The thermal noise is at 174 dBm/Hz. A spectrum analyzer has a resolution bandwidth of 1 kH...
- Q30. You're about to deploy an Enterprise-class VoWLAN infrastructure. You need to ensure that ...
- Q31. During your first pre-deployment meeting with the deployment team, you hand out the full d...
- Q32. What document is typically created to launch a project?...
- Q33. What advantage provided by 802.11n and 802.11ac is not usable in 1X1:1 low-end client devi...
- Q34. What single tool, by design can be used to verify channel selection, encryption in use and...
- Q35. When designing a WLAN to support voice in a large office, which design element is of the h...
- Q36. What is an advantage of centralized data forwarding?...
- Q37. In an RSN requiring low-latency reassociations and no fast secure roaming protocols, what ...
- Q38. What is the minimum PoE budget needed on a switch to support 6 (six) APs that can only be ...
- Q39. In an RSN requiring low-latency reassociations and no fast secure roaming protocols, what ...
- Q40. What document should be created that provides instructions for install technicians to moun...
- Q41. What action should be taken after implementing a WLAN based on the design developed from t...
- Q42. Location technology (RTLS) can use which of the following methods?(Choose all that apply.)...
- Q43. iPerf is a tool used in site surveys and validation surveys for what purpose? Response:...
- Q44. Before connecting, mounting and powering 213 total controller-based APs what action should...
- Q45. What are the best practices for belter location accuracy when deploying Wi-Fi RTLS?...
- Q46. In the enterprise, when is WPA/WPA2-Personal generally a recommended solution?(Choose all ...
- Q47. When deploying APs outdoors, what additional component needs to be used that is not needed...
- Q48. Which one of the following might be detected as a source of CCI during a post-validation s...
- Q49. What is the purpose of defining wall materials in WLAN design software?...
- Q50. An enterprise customer is subject to the highest standards for network uptime. When design...
- Q51. What type of standards-based encryption is used by office extension APs for the traffic tu...
- Q52. In a manufacturing facility with highly reflective materials, you are planning an upgrade ...
- Q53. What are methods of providing RF high availability? Response:...
- Q54. When a WLAN controller sends an 802.11 frame to a lightweight AP for transmission on the w...
- Q55. You have enabled IEEE 80211 FT in your WLAN infrastructure. You want to verify roaming bet...
- Q56. Given: You are evaluating the theoretical and real-world RF gain benefits of transmit and ...
- Q57. Why should band steering algorithms allow stations to connect to the 2.4 GHz band after so...
- Q58. What should always be done before connecting an AP to the production network? Response:...
- Q59. How can you increase efficiency in an 802 11n 2.4 GHz multiple-channel architecture networ...
- Q60. In a convention center, you have received complaints about the WLAN infrastructure. At thi...
- Q61. During an RFP analysis, one of the vendors mentioned that you'll need to upgrade your Giga...
- Q62. What commonly used item can help lo prevent back pain during lengthy site surveys?...
- Q63. When designing a static channel plan for an office using voice devices near an airport, wh...
- Q64. During lunch time in the break room of a company, Wi-Fi connectivity on the 2.4 GHz band i...
- Q65. What strategy can be used to ensure efficient cell overlap for VoIP site surveys? Response...
- Q66. What is the most appropriate antenna which will require the least Intentional Radiator pow...
- Q67. What differences exist between VLANs in wireless and wired domains? Response:...
- Q68. When selecting a centralized WLAN architecture, what new problem may arise when you change...
- Q69. In your company's WLAN, you expect to have a mixed client PHY environment and plan to use ...
- Q70. What functions do the control plane of centralized and distributed WLAN architectures help...
- Q71. Which one of the following options would you consider a well-designed WLAN infrastructure ...
- Q72. NicoCo is building a new facility and would like to install a WLAN for primary connectivit...
- Q73. If you choose to recommend dynamic channel assignment for the APs in your WLAN design what...
- Q74. HR/DSSS specifies the following PHY rates: Response:...
- Q75. Who should be in the final meeting from the customer-side after successfully implementing ...
- Q76. What are the deliverables to your customer after successfully implementing a WLAN infrastr...
- Q77. What document can be useful when determining client capabilities in a WLAN design project?...
- Q78. In this question, you will compare the mobility processes of a network that supports WPA2-...
- Q79. When troubleshooting coverage issues for a wireless network as it appears to new client as...
- Q80. When analyzing published competitive tests by equipment vendors, what items are the tests ...
- Q81. A wireless engineer from your company performed a site survey in an office building where ...
- Q82. What might limit the ability to locate 802.11 clients using a WLAN infrastructure without ...
- Q83. After deploying a 5 GHz-only WLAN infrastructure in the USA, using 20 MHz channel-widths a...
- Q84. Which type of building material causes the most attenuation of Wi-Fi signals'?...
- Q85. Name the audience type not addressed in this chapter for HLDs. Response:...
- Q86. In a convention center, you have received complaints about the WLAN infrastructure. At thi...
- Q87. When implementing multiple SSIDs to what is each SSID typically mapped in order to provide...
- Q88. What is the most suitable antenna option to be used when designing a WLAN infrastructure w...
- Q89. What is the best method of gathering attenuation measurements from any building materials ...
- Q90. In your company's WLAN, you expect to have a mixed client PHY environment and plan to use ...
- Q91. What are some significant drawbacks that are present with WPA/WPA2-Enterprise that are not...
- Q92. A museum wants to offer Wi-Fi to its visitors. One of their requirements is to have the AP...
- Q93. You are configuring an 802.11ac AP using manual channel planning. The design specification...
- Q94. Which operational plane would be responsible for performing automated RF management? Respo...
- Q95. An amplifier has a 1 dB compression point of 32 dBm and a gain of 20 dB. Which is the high...
- Q96. What happens when you double the channel width (for example, use channel bonding) in a BSS...
- Q97. An MSA commonly addresses at least which two legal categories?...
- Q98. You are tasked with designing the WLAN to accommodate certain high density areas on your u...
- Q99. What two 802.11 amendments deal with regulatory and transmission requirements? Response:...
- Q100. Switches and APs have already been chosen by your customer. All switches support 802.3bz M...
- Q101. NicoCo is building a new facility and would like to install a WLAN for primary connectivit...
