Join the discussion
Question 1/88
What Linux shell command can be used to view the hardware and PHY capabilities of a wireless adapter in detail including channel widths, output power setting, channels supported, and more?
Correct Answer: B
Add Comments
- Other Question (88q)
- Q1. What Linux shell command can be used to view the hardware and PHY capabilities of a wirele...
- Q2. Which unit of measurement is an absolute unit that is used to quantify received signal pow...
- Q3. Lynne runs a small hotel, and as a value added service for his customers he has implemente...
- Q4. You are reporting on the RF environment in you facility. The manager asks you do describe ...
- Q5. You have been tasked with creating a wireless link between two buildings on a single campu...
- Q6. What factor will have the most significant impact on the amount of wireless throughput ava...
- Q7. You are the network administrator for ABC Company. Your manager has recently attended a wi...
- Q8. An RF signal sometimes bends as it passes through some material other than free space. Wha...
- Q9. You are troubleshooting a client problem with a 2.4 GHz WLAN connection. The client is exp...
- Q10. Which directional antenna types are commonly used by indoor Wi-Fi devices in a MIMO multip...
- Q11. Three access points are used within a facility. One access point is on channel 11 and the ...
- Q12. What term correctly completes the following sentence? 802.11a/b/g used a mandatory 800ns g...
- Q13. A string of characters and digits is entered into an AP and a client STA for WPA2 security...
- Q14. A WLAN is implemented using wireless controllers. The APs must locate the controllers when...
- Q15. A WLAN transmitter that emits a 50 mW signal is connected to a cable with 3 dB loss. If th...
- Q16. You are being interviewed by ABC Company for employment as a wireless site survey expert. ...
- Q17. A Wi-Fi Alliance interoperability certificate indicates that a device is a/b/g/n certified...
- Q18. During a post-implementation survey, you have detected a non-802.11 wireless device transm...
- Q19. When implementing PoE, what role is played by a switch?...
- Q20. What is a channel mode specified by the 802.11n (High Throughput) PHY?...
- Q21. What statement is true concerning the use of Orthogonal Frequency Division Multiplexing (O...
- Q22. Your manager asked you to locate a solution that allows for centralized monitoring of WLAN...
- Q23. What phrase defines Equivalent Isotropically Radiated Power (EIRP)?...
- Q24. Which one of the following is not a factor considered when calculating the Link Budget for...
- Q25. You are using a site survey tool for post-implementation validation. You have installed th...
- Q26. A dual-band 802-1 lac AP must be powered by PoE. As a class 4 device, what power level sho...
- Q27. When considering data rates available in HT and VHT PJY devices, in addition to the modula...
- Q28. You are troubleshooting a controller-based AP that is unable to locate the controller. DHC...
- Q29. What is the final step in an effective troubleshooting process?...
- Q30. As you prepare for a site survey in a multi-floor corporate office, you have learned about...
- Q31. You administer a WLAN that offers a guest SSID of GUESTNWORK. User connect to the GUESTNWO...
- Q32. You have been tasked with creating a wireless link between two buildings on a single campu...
- Q33. What advantages does using predictive site survey modeling software offer over performing ...
- Q34. You are performing a post-implementation validation survey. What basic tool can be used to...
- Q35. You are troubleshooting an issue reported by several wireless users. The problem is contai...
- Q36. You are deploying a WLAN monitoring solution that utilizes distributed sensor devices. Whe...
- Q37. What answer correctly completes the following sentence? ____________ and physical carrier ...
- Q38. As a consultant, you've been hired by XYZ Company to provide recommendations about client ...
- Q39. Option 43 must be configured to allow access points to locate controllers. In what network...
- Q40. What 802.11 PHY uses available space in very low frequency ranges that is not in use at th...
- Q41. You are tasked with performing a throughput test on the WLAN. The manager asks that you us...
- Q42. A non-802.11 device is suspected of causing interference on the WLAN. You are not certain ...
- Q43. In a WALN security, what authentication method always creates Layer2 dynamic encryption ke...
- Q44. The requirements for a WLAN you are installing state that it must support unidirectional d...
- Q45. When compared with legacy Power Save mode, how does VHT TXOP power save improve battery li...
- Q46. When replacing the antenna of a WLAN device with a similar antenna type that has a higher ...
- Q47. What statements accurately describe the RF cables and connectors that are used in an 802.1...
- Q48. You are deploying a WLAN with the access points configured for 10 mW of output power on th...
- Q49. An RF signal sometimes bends as it passes through some material other than free space. Wha...
- Q50. Which one of the following channels can be used for VHT transmissions?...
- Q51. What 802.11 network configuration would result in multiple stations broadcasting Beacon fr...
- Q52. Which one of the following channels can be used for VHT transmissions?...
- Q53. ABC Company is planning to install a new 802.11ac WLAN, but wants to upgrade its wired inf...
- Q54. When a client moves to a new BSS within an ESS, what step is a part of the 802.11 reassoci...
- Q55. A standard PoE injector is use to power an access point requiring 802.3at. CAT6 cabling is...
- Q56. What fact is true regarding controllers and Aps in a split-MAC architecture?...
- Q57. You are managing a wireless access point in autonomous mode using the Web based interface....
- Q58. You have been tasked with creating a wireless link between two buildings on a single campu...
- Q59. What can an impedance mismatch in the RF cables and connectors cause?...
- Q60. ABC Company is planning a point-to-multipoint outdoor bridge deployment with standalone (a...
- Q61. A client complains of low data rates on his computer. When you evaluate the situation, you...
- Q62. What statement about the IEEE 802.11-2016 QoS facility is true?...
- Q63. What security method is commonly used for VoIP handsets when the infrastructure does not s...
- Q64. You are managing a wireless access point in autonomous mode using the Web based interface....
- Q65. When an ACK frame is not received by the transmitting STA, what is assumed?...
- Q66. What statement about 802.3. Clause 33 Power over Ethernet is true?...
- Q67. ABC Company has just purchased a 6 dBi patch antenna. After performing some tests with the...
- Q68. You were previously onsite at XYZ's facility to conduct a pre-deployment RF site survey. T...
- Q69. What statement is true concerning the use of Orthogonal Frequency Division Multiplexing (O...
- Q70. What best describes WPA2 in relation to 802.11 wireless network?...
- Q71. What is the most effective method for testing roaming in relation to 802.11 VoIP handsets?...
- Q72. You are troubleshooting a client issue on a Windows laptop. The laptop can see and connect...
- Q73. What statement about 802.11 WLAN performance is true?...
- Q74. What statement is true concerning the use of Orthogonal Frequency Division Multiplexing (O...
- Q75. What best describes WPA2 in relation to 802.11 wireless networks?...
- Q76. The BSA of an AP covers the area used by the sales and marketing department. Thirty-five s...
- Q77. In a Wi-Fi client configuration utility, what feature is most likely to be user configurab...
- Q78. You are troubleshooting a problem with interference from a non-802.11 device. Given that t...
- Q79. ABC Company has thousands of Wi-Fi users accessing their network on a daily basis. Their W...
- Q80. When a STA has authenticated to an AP (AP-1), but still maintains a connection with anothe...
- Q81. In an infrastructure Basic Service Set (BSS), how does the passive scanning process occur?...
- Q82. Return Loss is the decrease of forward energy in a system when some of the power is being ...
- Q83. You have received a report of poor wireless connections on the third floor of a building u...
- Q84. What factor is likely to cause the least impact on the application layer throughput of an ...
- Q85. What statement about 802.11 WLAN bridges is true?...
- Q86. What statement describes the authorization component of a AAA implementation?...
- Q87. You manage a WLAN with 100 802.1lac access points. All access points are configured to use...
- Q88. Which of the following frequency ranges are specified for use by IEEE 802.11 radios? (Choo...
