The guard interval is a short period of time inserted between the symbols of an OFDM signal to prevent inter-symbol interference and improve the robustness of the transmission1. The guard interval can have different values depending on the 802.11 standard and the configuration of the device. For example, 802.11n supports two guard intervals: 800 ns (normal) and 400 ns (short)2. 802.11ac supports the same guard intervals as 802.11n, plus an optional 200 ns guard interval for 80 MHz and 160 MHz channels3. 802.11ax supports three guard intervals: 800 ns, 1600 ns, and 3200 ns4.
The guard interval affects the data rate because it determines the duration of each symbol. A shorter guard interval means more symbols can be transmitted in a given time, resulting in a higher data rate. However, a shorter guard interval also means less protection against inter-symbol interference, which may degrade the signal quality and increase the error rate. Therefore, there is a trade-off between data rate and reliability when choosing the guard interval.
The MCS tables for HT and VHT PHY devices show the data rates for different combinations of modulation, coding, channel width, spatial streams, and guard intervals. For example, for a VHT device using MCS 9 with QAM-256 modulation, 5/6 coding rate, 80 MHz channel width, and one spatial stream, the data rate is 433.3 Mbps with a normal guard interval (800 ns) and 486.7 Mbps with a short guard interval (400 ns)2. Therefore, the guard interval impacts the data rate according to the MCS tables.