Join the discussion
Question 1/486
Refer to the exhibit.
An engineer must set access to Cisco IMC. The access must be allowed by logging onto the https //datacenter local web page The configuration presented is on the Cisco UCS C240 Series Server Which set of commands completes the configuration?
An engineer must set access to Cisco IMC. The access must be allowed by logging onto the https //datacenter local web page The configuration presented is on the Cisco UCS C240 Series Server Which set of commands completes the configuration?
Correct Answer: C
To set access to Cisco IMC (Integrated Management Controller) and allow logging onto the https://datacenter.local web page, the correct set of commands is found in option C. These commands will configure the network settings on the Cisco UCS C240 Series Server to enable web access to the Cisco IMC interface. The configuration typically involves setting the correct IP address, gateway, and other network parameters that align with the data center's network design.
References :=
* Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide
* Cisco Data Center Core Technologies (DCCOR) study materials
References :=
* Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide
* Cisco Data Center Core Technologies (DCCOR) study materials
Add Comments
- Other Question (486q)
- Q1. Refer to the exhibit. An engineer must set access to Cisco IMC. The access must be allowed...
- Q2. Refer to the exhibit. (Exhibit) Which action is taken to ensure that the relay agent forwa...
- Q3. Which adjacency server configuration makes two OTV edge devices located in the same site b...
- Q4. An engineer is configuring a vHBA template in UCS Manager. The engineer needs to specify t...
- Q5. An engineer must start a software upgrade on a Cisco Nexus 5000 Series Switch during a zon...
- Q6. A network architect is asked to design and manage geographically distributed data centers ...
- Q7. An engineer is converting a Cisco MDS switch to support NPIV mode. What should be consider...
- Q8. Refer to the exhibit. (Exhibit) Which type of backup is required to restore a Cisco UCS co...
- Q9. Refer to the exhibit. (Exhibit) Which command must be used to restore configuration change...
- Q10. An engineer must shut down the Ethernet 1/2 interface when the Ethernet 4/5 interface stat...
- Q11. An engineer is implementing NetFlow on a Cisco Nexus 7000 Series Switch. Drag and drop the...
- Q12. A company plans to migrate some of its services to the cloud. The company does not want to...
- Q13. An engineer is duplicating an existing Cisco UCS setup at a new site. What are two charact...
- Q14. A network engineer is adding a Cisco HyperFlex data platform to the Cisco intersight manag...
- Q15. Refer to the exhibit. (Exhibit) Which two statements describe the routing table of the lea...
- Q16. A UCS B- Series server located in B5108 chassis 1 slot 1 is currently unavailable. The ser...
- Q17. Which two statements about the process of upgrading an EPLD on a Cisco MDS 9000 series Swi...
- Q18. Drag and drop the storage technologies from the left onto the correct descriptions on the ...
- Q19. Host 1 is in VLAN 100 located is DataCenter 1 and Host2 is in VLAN200 located in DataCente...
- Q20. An engineer is implementing the Cisco ACI fabric and must create two different vPCs from l...
- Q21. (Exhibit) Refer to the exhibit. An administrator must complete the unified fabric configur...
- Q22. Refer to the exhibit. (Exhibit) In a bidirectional PIM network using Phantom RP as an RP r...
- Q23. An engineer changed a configuration and must perform a rollback. Which statement applies t...
- Q24. (Exhibit) Refer to the exhibit. Server1 is connected to a Cisco Nexus 9000 Series Switch v...
- Q25. A customer data center is configured for distribution of user roles, call home, and NTP. T...
- Q26. An engineer performs a Firmware Auto Install upgrade through the Cisco UCS Manager. Which ...
- Q27. An engineer must implement a disaster recovery policy for the Cisco UCS infrastructure. Th...
- Q28. Which feature must be enabled to support the use of JSON and XML encodings when a Cisco Ne...
- Q29. An engineer must configure a named VSAN when the fabric interconnect is in Fibre Channel s...
- Q30. A network engineer needs to upgrade the EPLDs of the fabric modules for a Cisco MDS direct...
- Q31. Drag and drop the mechanisms to collect data from a network from the left onto their chara...
- Q32. Which two components should be checked when a Cisco Nexus 9000 Series Switch fails to boot...
- Q33. Refer to the exhibit. (Exhibit) What is a characteristic presented in the service profile ...
- Q34. Which communication method does NFS use for requests between servers and clients?...
- Q35. Drag and drop the fields for configuring a full state backup file of the Cisco UCS Manager...
- Q36. A customer asks an engineer to develop a framework that will be used to replace the proces...
- Q37. Drag and drop the steps on the left onto the order that they must be implemented on the ri...
- Q38. An engineer must implement a Cisco UCS system at a customer site. One of the requirements ...
- Q39. Which two firmware packages are included in the Cisco UCS C-Series Rack-Mount UCS-Managed ...
- Q40. An engineer needs to install a new package on a Cisco Nexus 9000 Series Switch. What is th...
- Q41. An engineer needs to Implement a solution that prevents loops from occurring accidentally ...
- Q42. An engineer updated firmware on Fabric Interconnects and activates it. However, the endpoi...
- Q43. A network administrator must configure an extra keyring in Cisco UCS Manager. The key must...
- Q44. What is a characteristic of the install all command on the cisco Nexus series switch?...
- Q45. Refer to the exhibit. (Exhibit) Which result of running the command is true?...
- Q46. Refer to the exhibit. (Exhibit) An engineer must distribute all the host ports to use all ...
- Q47. An engineer must apply AAA configuration on a Cisco MDS 9000 Series Switch. The solution m...
- Q48. An engineer is configuring VNTag between a virtualized server and a Cisco Nexus 5500 Serie...
- Q49. A network engineer must implement RBAC on Cisco MDS 9000 Series Multilayer Switches. Drag ...
- Q50. What are two capabilities of the Cisco Network Assurance Engine? (Choose two.)...
- Q51. Refer to the exhibit. (Exhibit) Refer to the exhibit. An engineer needs to implement strea...
- Q52. Refer to the exhibit. (Exhibit) An engineer is implementing zoning on two Cisco MDS switch...
- Q53. (Exhibit) Refer to the exhibit. An engineer must invoke a Python script that alerts the op...
- Q54. An engineer is implementing FCoE. Which aspect of DCBXP on a Cisco Nexus switch affects th...
- Q55. (Exhibit) An engineer must use the python module in the guest shell of the Cisco Nexus 900...
- Q56. An engineer is implementing an import operation in Cisco UCS Manager. What is the impact o...
- Q57. (Exhibit) Refer to the exhibit. Software downgrade is required on a Cisco Nexus 7000 Serie...
- Q58. Refer to the exhibit. (Exhibit) What is the result of this series of commands?...
- Q59. Refer to the exhibit. An engineer must monitor ingress traffic from SW1 and SW2 port-chann...
- Q60. Drag and drop the mechanisms to collect data from a network from the left onto their chara...
- Q61. Which service profile is affected if the default host firmware policy in Cisco UCS Manager...
- Q62. Refer to the exhibit. (Exhibit) What is the outcome of this command when the ELPD is updat...
- Q63. An infrastructure architect is analyzing the deployment type for an application. Several c...
- Q64. An engineer is using REST API calls to configure the cisco APIC. Which data structure must...
- Q65. Refer to the exhibit. (Exhibit) Drag and drop each traffic flow type from the left onto th...
- Q66. Refer to the exhibit. (Exhibit) What is the reason the system-fm-vrrp checkpoint was creat...
- Q67. APIC EPG Resolution Immediacy is set to "Immediate" Which statement is true about the Depl...
- Q68. An engineer must configure Cisco IMC server management NIC for autonegotiation. Which sett...
- Q69. A customer reports Fibre Channel login requests to a cisco MDS 9000 series Switch from an ...
- Q70. Refer to the exhibit. (Exhibit) An engineer configures a new application profile using RES...
- Q71. A UCS B- Series server located in B5108 chassis 1 slot 1 is currently unavailable. The ser...
- Q72. Refer to the exhibit. (Exhibit) Drag and drop each traffic flow type from the left onto th...
- Q73. A customer wants to offload some of its order processing to a public cloud environment. Th...
- Q74. What is an advantage of streaming telemetry over SNMP?...
- Q75. An engineer is converting a Cisco MDS switch to support NPIV mode. What should be consider...
- Q76. Refer to Exhibit: (Exhibit) An engineer must use the python module in the guest shell of t...
- Q77. An engineer configures a storage environment for a customer with high-security standards. ...
- Q78. Refer to the exhibit. (Exhibit) Which action must be taken before the maintenance policy c...
- Q79. Refer to the exhibit. (Exhibit) An engineer configures FCIP on a Cisco MDS 9000 Series swi...
- Q80. A network architect considers a Cisco HyperFlex design solution for a company. The propose...
- Q81. Which MAC address is an HSRP version 2?
- Q82. A network engineer must create an EEM script that saves a copy of the running configuratio...
- Q83. Which adjacency server configuration makes two OTV edge devices located in the same site b...
- Q84. An administrator is implementing DCNM so that events are triggered when monitored traffic ...
- Q85. A network engineer is asked to describe the cloud infrastructure models from the perspecti...
- Q86. An engineer is implementing Cisco Intersight in a secure environment. The environment must...
- Q87. An engineer must recover the Cisco UCS system The full backup is available on a backup SCP...
- Q88. A network engineer must implement a telemetry solution to collect real-time structured dat...
- Q89. Drag and drop the keywords onto the URL request to collect all the subnets configured unde...
- Q90. A Cisco UCS user called "Employee1" accidentally changed the boot policy of the Cisco UCS ...
- Q91. An engineer must perform an initial configuration of VXLAN Tunnel End-Point functionality ...
- Q92. An engineer must configure a Cisco UCS domain for monitoring and management by the Cisco I...
- Q93. Refer to the exhibit. (Exhibit) The STP priority of N7K-1 and N7K-2 are the lowest in the ...
- Q94. A network engineer must implement RBAC on Cisco MDS 9000 Series Multilayer Switches. Drag ...
- Q95. A network engineer must create an EEM script that saves a copy of the running configuratio...
- Q96. APIC EPG Resolution Immediacy is set to "Immediate". Which statement is true about the Dep...
- Q97. (Exhibit) Refer to the exhibit. VLAN 10 Is experiencing delays and packet drops when the t...
- Q98. A storage array must be connected to port ethernet1/10 on a Cisco MDS 9000 Series Switch I...
- Q99. What is a benefit of independent resource scaling in Cisco HyperFlex hybrid architecture?...
- Q100. An engineer must ensure fabric redundancy when implementing NPV mode on a Cisco MDS 9000 S...
- Q101. Which command reduces the amount of time it takes to complete the ISSU on a Cisco Nexus 70...
- Q102. An engineer needs to create a new user in the local user database on Cisco UCS Fabric Inte...
- Q103. An engineer must configure multiple EPGs on a single access port in a large Cisco ACI fabr...
- Q104. A network engineer must configure FCoE on an interface of a Cisco MDS 9000 Series Switch. ...
- Q105. An infrastructure architect is analyzing the deployment type for an application. Several c...
- Q106. Which feature is supported with an In-Service Software Upgrade on a Cisco Nexus 9000 Serie...
- Q107. Due to a major version change, an engineer must perform a software upgrade on a Cisco Nexu...
- Q108. The Cisco Nexus 5600 Series Switch experiences occasional packet drops on interface ethern...
- Q109. Drag and drop the Hyperflex characteristics from the left onto the appropriate Hyper Hex n...
- Q110. Refer to the exhibit. (Exhibit) Which command needs to be added to the line starling with ...
- Q111. An engineer must implement a Cisco UCS system at a customer site. One of the requirements ...
- Q112. An engineer must create a PowerShell script that leverages the Cisco UCS Manager PowerShel...
- Q113. Refer to the exhibit. (Exhibit) A flapping link issue has been reported on the vPC keepali...
- Q114. Several production and development database servers exist in the same EPG and IP subnet. T...
- Q115. Which data structure results from running this Python code? (Exhibit)...
- Q116. An engineer needs to implement a solution that will provide telemetry of MDS 9000 switches...
- Q117. A customer has a requirement for an automation solution that supports periodically acquiri...
- Q118. An engineer must configure an LACP port channel on two Cisco Nexus 7000 Series Switches. T...
- Q119. Refer to the exhibit. (Exhibit) An engineer must access a Cisco UCS C-Series server KVM fr...
- Q120. An engineer deploys a custom guest shell rootfs onto multiple switches. Drag and drop the ...
- Q121. Refer to the exhibit. (Exhibit) What is the outcome of this command when the ELPD is updat...
- Q122. (Exhibit) Refer to the exhibit. A developer must create a Bash script that performs a Chef...
- Q123. A network engineer must restore the running configuration on a Cisco Nexus 5000 Series Swi...
- Q124. An engineer must configure Cisco UCS Manager to accept only HTTPS connections that use TLS...
- Q125. What are two requirements when planning a Cisco HyperFlex All Flash standard cluster insta...
- Q126. What is a characteristic of EPLD updates on Cisco MDS 9000 Series Switches?...
- Q127. An engineer must configuration a backup and restore of Cisco UCS Manager during the weeken...
- Q128. Which two actions should be performed before upgrading the infrastructure and firmware of ...
- Q129. Which two actions should be performed before upgrading the infrastructure and firmware of ...
- Q130. An engineer is duplicating an existing Cisco UCS setup at a new site. What are two charact...
- Q131. An engineer needs to make an XML backup of Cisco UCS Manager The backup should be transfer...
- Q132. Refer to the exhibit. (Exhibit) What is the result of this series of commands?...
- Q133. (Exhibit) Refer to the exhibit. Which backup operation type not include the preserve ident...
- Q134. Refer to the exhibit. (Exhibit) An engineer is configuring a VSAN on the network Which opt...
- Q135. An engineer must build a lab replica of a Cisco UCS production environment. The file must ...
- Q136. A customer deploys a media server to distribute streaming videos to network clients. The r...
- Q137. (Exhibit) Refer to the exhibit. A user must be granted management access to the Cisco Nexu...
- Q138. A customer has a requirement for an automation solution that supports periodically acquiri...
- Q139. An engineer needs a utility to translate traditional Nexus CLI inputs and generate Python ...
- Q140. Refer to the exhibit. (Exhibit) Which action is taken to ensure that the relay agent forwa...
- Q141. An engineer is seeking the most optimal on demand CPU performance while configuring the BI...
- Q142. Which two configuration settings are available in the Cisco UCS Firmware Auto Sync Server ...
- Q143. An engineer must shut down the Ethernet 1/2 interface when the Ethernet 4/5 interface stat...
- Q144. Which configuration implements static ingress replication?...
- Q145. An engineer must configure a Cisco MDS 9000 Series Switch to store generated log messages ...
- Q146. Refer to the exhibit. (Exhibit) Why does the python code for Cisco NX-API print error mess...
- Q147. (Exhibit) Refer to the exhibit. An engineer must monitor the Ethernet port and the corresp...
- Q148. What is the benefit of adding Cisco HyperFlex Hardware Acceleration Cards to a HyperFlex d...
- Q149. Drag and drop the characteristics from the left onto the correct storage systems on the ri...
- Q150. Refer to the exhibit. (Exhibit) The server is sending traffic to the storage server using ...
- Q151. An engineer must configure a Nexus 7000 series switch for HSRP on VLAN 100. When fully fun...
- Q152. (Exhibit) Refer to the exhibit. An engineer must monitor ingress traffic from SW1 and SW2 ...
- Q153. Refer to the exhibit. (Exhibit) A flapping link issue has been reported on the vPC keepali...
- Q154. Refer to the exhibit. (Exhibit) An engineer configures a new application profile using RES...
- Q155. A Cisco UCS user called "Employee1" accidentally changed the boot policy of the Cisco UCS ...
- Q156. An engineer must configure a VDS port group using APIC policy. The requirements are for th...
- Q157. Refer to the exhibit. (Exhibit) In a bidirectional PIM network using Phantom RP as an RP r...
- Q158. An engineer is configuring a backup operation on the existing Cisco UCS environment using ...
- Q159. Drag and drop the fields for configuring a full state backup file of the Cisco UCS Manager...
- Q160. Drag and drop the network assurance concepts from the left onto the corresponding benefits...
- Q161. What are two capabilities of the Cisco Network Assurance Engine? (Choose two.)...
- Q162. Which configuration implements static ingress replication?...
- Q163. A network engineer must deploy a configuration backup policy to the cisco UCS manager. The...
- Q164. An engineer must recover configuration on a Cisco MDS 9000 Series switch from a previous v...
- Q165. An engineer is configuring VNTag between a virtualized server and a Cisco Nexus 5500 Serie...
- Q166. A network engineer must implement RBAC on Cisco MDS 9000 Series Multilayer Switches. Drag ...
- Q167. An engineer performs a Cisco UCS C480 ML M5 installation from a Cisco UCS Manager As a par...
- Q168. Refer to the exhibit. (Exhibit) Which statement about the ERSPAN configuration in this env...
- Q169. A storage engineer must configure zoning on a Cisco MDS 9000 Series switch. Drag and drop ...
- Q170. Refer to the exhibit. (Exhibit) What is a characteristic presented in the service profile ...
- Q171. Which feature must be enabled to support the use of JSON and XML encoding when a Cisco Nex...
- Q172. Which two statements about the process of performing an EPLD upgrade on a Cisco MDS 9000 s...
- Q173. A network engineer must deploy a configuration backup policy to the Cisco UCS Manager. The...
- Q174. A SAN administrator must Implement Infrastructure monitoring for the Fibre Channel storage...
- Q175. Host 1 is in VLAN 100 located is DataCenter 1 and Host2 is in VLAN200 located in DataCente...
- Q176. An engineer changed a configuration and must perform a rollback. Which statement applies t...
- Q177. Drag and drop the characteristics from the left onto the correct storage systems on the ri...
- Q178. A network engineer is asked to describe the cloud infrastructure models from the perspecti...
- Q179. Refer to the exhibit. (Exhibit) Which action must be taken before the maintenance policy c...
- Q180. An engineer implements a Python script inside a Cisco Bash shell The script contains this ...
- Q181. Which two configuration settings are available in the in the cisco UCS flmware Auto sync s...
- Q182. A network engineer configures a converged network adapter (CNA) and must associate a virtu...
- Q183. Refer to the exhibit. (Exhibit) What is the result of implementing the configuration?...
- Q184. (Exhibit) Refer to the exhibit. Which information must be added to the script to complete ...
- Q185. An engineer performs a set of configuration changes for the vPC domain using Session Manag...
- Q186. A Cisco MDS 9000 Series Switch is configured for SAN Analytics and SAN Telemetry Streaming...
- Q187. Drag and drop the characteristics from the left onto the correct storage systems on the ri...
- Q188. An engineer installed a new Nexus switch with the mgm0interface in vrf management. Connect...
- Q189. Which two statements about the process of performing an EPLD upgrade on a Cisco MDS 9000 s...
- Q190. An engineer must recover configuration on a Cisco MDS 9000 Series switch from a previous v...
- Q191. Refer to the exhibit. (Exhibit) What is a characteristic presented in the service profile ...
- Q192. (Exhibit) Refer to the exhibit The ASA 1 acts as a Layer 3 gateway for all servers. The se...
- Q193. Refer to the exhibit. (Exhibit) What is the result of implementing this configuration?...
- Q194. Which statement about the MAC address that the FCoE Initialization Protocol chooses for us...
- Q195. Which two firmware packages are included in the Cisco UCS C-Series Rack-Mount UCS-Managed ...
- Q196. Refer to the exhibit. (Exhibit) Which two Cisco UCS components are upgraded as a result of...
- Q197. An engineer configured an environment that contains the vPC and non-vPC switches. However,...
- Q198. Which storage protocol reduces file locks by using leasing?...
- Q199. An engineer must configure OSPF in the data center. The external routes have already been ...
- Q200. Which two configuration settings are available in the in the cisco UCS flmware Auto sync s...
- Q201. What is an advantage of NFS as compared to Fibre Channel?...
- Q202. Refer to the exhibit. (Exhibit) Which type of backup is required to restore a Cisco UCS co...
- Q203. What is an advantage of streaming telemetry over SNMP?...
- Q204. A network engineer must implement a telemetry solution to collect real-time structured dat...
- Q205. A network engineer plans to upgrade the firmware of a Cisco UCS B-Series chassis by using ...
- Q206. An engineer has a primary fabric that is named UCS-A and a secondary fabric that is named ...
- Q207. An engineer is enabling port security on a Cisco MDS 9000 Series Switch. Which feature of ...
- Q208. An engineer must configure the HSRP protocol between two Cisco Nexus 9000 Series Switches ...
- Q209. A network engineer must implement RBAC on Cisco MDS 9000 Series Multilayer Switches. Drag ...
- Q210. A network engineer must prevent data comuption due to cross fabric communication in an FCo...
- Q211. A network engineer must implement RBAC on Cisco MDS 9000 Series Multilayer Switches. Drag ...
- Q212. An engineer must apply AAA configuration on a Cisco MDS 9000 Series Switch. The solution m...
- Q213. A company is running a pair of cisco Nexus 7706 series switches as part of a data center s...
- Q214. An engineer configured an environment that contains the vPC and non-vPC switches. However,...
- Q215. An engineer requires a solution to automate the configuration and deployment of remote net...
- Q216. A network engineer needs to configure system logging on the MDS switch. The messages must ...
- Q217. An engineer is configuring VNTag between a virtualized server and a Cisco Nexus 5500 Serie...
- Q218. A network engineer must configure FCoE on an interface of a Cisco MDS 9000 Series Switch. ...
- Q219. Which storage protocol reduces file locks by using leasing?...
- Q220. A connect network engineer connects the CAN interface of a server to a switch. The switch ...
- Q221. Which two statements about the process of performing an EPLD upgrade on a Cisco MDS 9000 s...
- Q222. Drag and drop the storage technologies from the left onto the correct descriptions on the ...
- Q223. Refer to the exhibit. (Exhibit) What is a characteristic of the UUID in the service profil...
- Q224. What is an advantage of NFS as compared to Fibre Channel?...
- Q225. (Exhibit) Refer to the exhibit A network engineer must run a continuous capture on a port ...
- Q226. Which two actions should be taken before an upgrade is started on a Cisco MDS switch? (Cho...
- Q227. Refer to the exhibit. (Exhibit) What be connected to clear the HA NOT READY status?...
- Q228. An engineer must implement private VLANs for a group of Cisco UCS 8-Series servers. The pr...
- Q229. APIC EPG Resolution Immediacy is set to "Immediate". Which statement is true about the Dep...
- Q230. (Exhibit) Refer to the exhibit. An engineer needs to implement streaming telemetry on a ci...
- Q231. Drag and drop the keywords onto the URL request to collect all the subnets configured unde...
- Q232. (Exhibit) Refer to the exhibit. An engineer configures FCIP on a Cisco MDS 9000 Series swi...
- Q233. An engineer needs a utility to translate traditional Nexus CLI inputs and generate Python ...
- Q234. A customer reports Fibre Channel login requests to a cisco MDS 9000 series Switch from an ...
- Q235. An engineer implements an ACI fabric and must implement microsegmentation of endpoints wit...
- Q236. Port security is enabled on a Cisco MDS 9000 series Switch. Which statement is true?...
- Q237. A DevOps engineer must implement a bash script to query a REST API and return the availabl...
- Q238. Drag and drop the mechanisms to collect data from a network from the left onto their chara...
- Q239. Port security is statically configured on a Cisco Nexus 7700 Series switch and F3 line car...
- Q240. Refer to the exhibit. (Exhibit) An engineer is configuring a VSAN on the network Which opt...
- Q241. An engineer must implement a disaster recovery policy for the Cisco UCS infrastructure. Th...
- Q242. An engineer is configuring VNTag between a virtualized server and a Cisco Nexus 5500 Serie...
- Q243. An engineer deploys a custom guest shell rootfs onto multiple switches. Drag and drop the ...
- Q244. An engineer must recover configuration on a Cisco MDS 9000 Series switch from a previous v...
- Q245. Refer to the exhibit. (Exhibit) What is the outcome of this command when the ELPD is updat...
- Q246. A network administrator must create a Linux container on a Cisco Nexus Series Switch. The ...
- Q247. When a strict CoPP policy is implemented, which statement describes an event during which ...
- Q248. Which behavior defines streaming telemetry as a push model in Cisco devices?...
- Q249. An engineer must apply AAA configuration on a Cisco MDS 9000 Series Switch. The solution m...
- Q250. Which two components should be checked when a Cisco Nexus 9000 Series Switch fails to boot...
- Q251. An engineer must configure a Cisco UCS blade system that is managed by Cisco UCS Manager. ...
- Q252. An engineer must configure a control plane policy on a Cisco Nexus 9000 Series Switch that...
- Q253. An engineer is implementing security on the Cisco MDS 9000 switch. Drag drop the descripti...
- Q254. Which behavior defines streaming telemetry as a push model in Cisco devices?...
- Q255. Refer to the exhibit. (Exhibit) Which type of backup is required to restore a Cisco UCS co...
- Q256. Drag and drop the network assurance concepts from the left onto the corresponding benefits...
- Q257. AN engineer is asked to modify an overridden policy by changing the number of FCNS databas...
- Q258. A network engineer configures a converged network adapter (CNA) and must associate a virtu...
- Q259. A network engineer must SPAN only the ingress traffic of a Cisco MDS 9000 series switch fr...
- Q260. An engineer must configure a VXLAN routing on a cisco Nexus 9000 series Switch. The engine...
- Q261. A network architect wants to propose a scalable network monitoring solution in which data ...
- Q262. Refer to the exhibit. (Exhibit) A flapping link issue has been reported on the vPC keepali...
- Q263. In an FCoE environment, for which two sets of data must an interface that implements the P...
- Q264. An engineer is duplicating an existing Cisco UCS setup at a new site. What are two charact...
- Q265. Refer to the exhibit. (Exhibit) What is configured as a result of running these commands?...
- Q266. Refer to the exhibit. (Exhibit) An engineer configures a new application profile using RES...
- Q267. What is a characteristic of electronic programmable logic device (EPLD) software upgrades?...
- Q268. Which product includes prebuilt templates that are available to be used to customize fabri...
- Q269. A Cisco UCS C-Series server is installed at a data center. The server should be managed by...
- Q270. An engineer is implementing security on the Cisco MDS 9000 switch. Drag drop the descripti...
- Q271. (Exhibit) Refer to the exhibit During a vPC peer switch reload, there is packet loss betwe...
- Q272. Which two statements about the process of performing an EPLD upgrade on a Cisco MDS 9000 S...
- Q273. Refer to the exhibit. (Exhibit) A flapping link issue has been reported on the vPC keepali...
- Q274. Drag and drop the network assurance concepts from the left onto the corresponding benefits...
- Q275. Refer to the exhibit. (Exhibit) Drag and drop each traffic flow type from the left onto th...
- Q276. What are two capabilities of the Cisco Network Assurance Engine? (Choose two.)...
- Q277. Refer to the exhibit. (Exhibit) Refer to the exhibit A network administrator experiences t...
- Q278. A network engineer must create an EEM script that saves a copy of the running configuratio...
- Q279. Refer to the exhibit. (Exhibit) A network engineer is setting up a multihomed OTV network....
- Q280. An engineer is running an ACI fabric, has VMM integration with VMware vCenter, and wants t...
- Q281. Which configuration statically assigns VSAN membership to a virtual Fibre Channel interfac...
- Q282. Refer to the exhibit. (Exhibit) Drag and drop each traffic flow type from the left onto th...
- Q283. Refer to the exhibit. (Exhibit) Which two statements describe the routing table of the lea...
- Q284. Refer to the exhibit. (Exhibit) Which two statements describe the routing table of the lea...
- Q285. A UCS B- Series server located in B5108 chassis 1 slot 1 is currently unavailable. The ser...
- Q286. A network engineer must perform a backup and restore of the Cisco Nexus 5000 Series Switch...
- Q287. Port security is enabled on a Cisco MDS 9000 series Switch. Which statement is true?...
- Q288. An engineer must configure the order in which the server attempts to boot from available b...
- Q289. Drag and drop the characteristics from the left onto the correct storage systems on the ri...
- Q290. An engineer must configure RBAC is Cisco UCS Manager in an existing data center environmen...
- Q291. A customer has a requirement to deploy a cloud service and needs to have full control over...
- Q292. Refer to the exhibit. (Exhibit) Which two statements about the routing table of the leaf s...
- Q293. The Cisco Nexus 5600 Series Switch experiences occasional packet drops on interface ethern...
- Q294. A customer data center experiences bandwidth contention that affects the servers connected...
- Q295. Refer to the exhibit. (Exhibit) What be connected to clear the HA NOT READY status?...
- Q296. An engineer is asked to use SaaS to manage Cisco computing. Which two items are needed to ...
- Q297. The EPLD update of the supervisor module has been scheduled for several cisco MDS 9000 swi...
- Q298. Refer to the exhibit. (Exhibit) The STP priority of N7K-1 and N7K-2 are the lowest in the ...
- Q299. Which two authentication types does Cisco UCS Manager support when configuration authentic...
- Q300. Which statement about the MAC address that the FCoE Initialization Protocol chooses for us...
- Q301. An engineer must perform a backup and restore in Cisco UCS to rebuild the system in a disa...
- Q302. A DevOps engineer must implement a bash script to query a REST API and return the availabl...
- Q303. An engineer must implement an automation solution to allow the backup of the configuration...
- Q304. A network engineer repeatedly saves a configuration on Catalyst switches to NVRAM using th...
- Q305. A Cisco Nexus 7000 Series switch runs VXLAN, and interface Ethernet 7/30 is configured as ...
- Q306. Refer to the exhibit. (Exhibit) In a bidirectional PIM network using Phantom RP as an RP r...
- Q307. An engineer is implementing security on the Cisco MDS 9000 switch. Drag drop the descripti...
- Q308. Which statement about the MAC address that the FCoE Initialization Protocol chooses for us...
- Q309. AN engineer enters these commands while in EEM on a Cisco Nexus 9000 Series Switch. event ...
- Q310. An engineer installed a new Nexus switch with the mgm0interface in vrf management. Connect...
- Q311. What is a recommended design choice in a topology for multipathing iSCSI traffic?...
- Q312. Refer to the exhibit. (Exhibit) What is the result of implementing this configuration?...
- Q313. An engineer must implement a Cisco UCS system at a customer site. One of the requirements ...
- Q314. Refer to the exhibit. (Exhibit) What be connected to clear the HA NOT READY status?...
- Q315. A network engineer is adding a Cisco HyperFlex data platform to the Cisco Intersight manag...
- Q316. A network engineer must implement RBAC on Cisco MDS 9000 Series Multilayer Switches. Drag ...
- Q317. An engineer must configure device aliases for a Cisco MDS 9000 Series Switches-based SAN f...
- Q318. An engineer must migrate a Cisco UCS C-Series server from Cisco SingleConnect to direct in...
- Q319. The Cisco Nexus switch Generic Online Diagnostics policy for a PortLoopback test requires ...
- Q320. Which two actions are needed to configure a single Cisco APIC controller for Cisco ACI fab...
- Q321. Refer to the exhibit. (Exhibit) What is the result of implementing this configuration?...
- Q322. An engineer must configure a named VSAN when the fabric interconnect is in Fibre Channel s...
- Q323. Port security is enabled on a Cisco MDS 9000 Series Switch. Which statement is true?...
- Q324. A customer data center is configured for distribution of user roles, call home, and NTP. T...
- Q325. Several production and development database servers exist in the same EPG and IP subnet. T...
- Q326. Multiple roles are applied to a user on the Cisco MDS 9000 Series Switch. Which statement ...
- Q327. In an FCoE environment, for which two sets of data must an interface that implements the P...
- Q328. Which NFS version uses the TCP protocol and needs only one IP port to run the service?...
- Q329. Which configuration implements static ingress replication? (Exhibit)...
- Q330. Refer to the exhibit. (Exhibit) What is the result of this series of commands?...
- Q331. A storage engineer must configure zoning on a Cisco MDS 9000 Series switch. Drag and drop ...
- Q332. What happens to the default host firmware policy after a Cisco UCS Manager upgrade?...
- Q333. An engineer must create a new Cisco UCS user account to perform these actions: * Modify sy...
- Q334. Refer to the exhibit. (Exhibit) Which action must be taken before the maintenance policy c...
- Q335. An engineer is implementing Cisco Intersight in a secure environment. The environment must...
- Q336. A customer reports Fibre Channel login requests to a cisco MDS 9000 series Switch from an ...
- Q337. Refer to the exhibit. (Exhibit) Refer to the exhibit During a vPC peer switch reload, ther...
- Q338. An engineer needs to perform a backup of user roles and locales from Cisco UCS Manager to ...
- Q339. Refer to the exhibit. A network engineer must Improve the convergence time during vPC prim...
- Q340. A network engineer must configure a Fibre Channel port monitoring for the local port. The ...
- Q341. Refer to the exhibit. (Exhibit) In a bidirectional PIM network using Phantom RP as an RP r...
- Q342. Which two firmware packages are included in the Cisco UCS C-Series Rack-Mount UCS-Managed ...
- Q343. What is the impact of an EPLD upgrade on a Cisco MDS 9000 Series Switch?...
- Q344. An engineer is using REST API calls to configure the cisco APIC. Which data structure must...
- Q345. What is a feature of NFS?
- Q346. Where is the witness deployed in a two-node Cisco HyperFlex Edge deployment?...
- Q347. Which two actions should be taken before an upgrade is started on a Cisco MDS switch? (Cho...
- Q348. (Exhibit) Refer to the exhibit. The Cisco Nexus Series Switches SW1, SW2, and SW3 are conn...
- Q349. Refer to the exhibit. (Exhibit) Which result of running the command is true?...
- Q350. Refer to the exhibit. (Exhibit) Which result of running the command is true?...
- Q351. A new employee must be granted access to add VLANs into an existing Cisco UCS Manager and ...
- Q352. Which communication method does NFS use for requests between servers and clients?...
- Q353. Refer to the exhibit. (Exhibit) Refer to the exhibit. A secure server that provides servic...
- Q354. Drag and drop the technologies from the left onto the description on the right. (Exhibit)...
- Q355. Which communication method does NFS use for requests between servers and clients?...
- Q356. An engineer is configuring AAA authentication on an MDS 9000 switch. The LDAP server is lo...
- Q357. The engineer must configure SPAN on a cisco Nexus 5000 Series switch to get a capture of t...
- Q358. An environment consists of a Cisco MDS 9000 Series Switch that uses port channels. An engi...
- Q359. Which method must a network engineer use to upgrade the BIOS firmware or a Cisco UCS stand...
- Q360. Which mroute state is created when Bidirectional PIM is deployed at a site?...
- Q361. Refer to the exhibit. (Exhibit) Which configuration ensure that the cisco Nexus 7000 serie...
- Q362. Which feature must be enabled to support the use of JSON and XML encoding when a Cisco Nex...
- Q363. Drag and drop the NAS features from the left onto the NAS descriptions on the right. Not a...
- Q364. What happens to the default host firmware policy after a Cisco UCS Manager upgrade?...
- Q365. Which behavior defines streaming telemetry as a push model in Cisco devices?...
- Q366. (Exhibit) Refer to the exhibit An engineer must configure fabric binding on a Cisco MDS 90...
- Q367. Refer to the exhibit. (Exhibit) Which VLANs are capable to be assigned on vPC interfaces?...
- Q368. A network engineer must prevent data comuption due to cross fabric communication in an FCo...
- Q369. Refer to the exhibit. (Exhibit) Service degradation is reported on a VM that is deployed o...
- Q370. An engineer changed a configuration and must perform a rollback. Which statement applies t...
- Q371. Drag and drop the hyperflex characteristics from the left onto the appropriate. HyperFlex ...
- Q372. Refer to the exhibit. (Exhibit) Which backup operation type does not include the Preserve ...
- Q373. Which command reduces the amount of time it takes to complete the ISSU on a Cisco Nexus 70...
- Q374. A network engineer must configure FCoE on an interface of a cisco MDS 9000 series switch. ...
- Q375. A network administrator must create a Linux container on a Cisco Nexus Series Switch. The ...
- Q376. Which virtual MAC address is the default for HSRP version 2 group 10?...
- Q377. Refer to the exhibit. (Exhibit) Refer to the exhibit. A network engineer is implementing a...
- Q378. Refer to the exhibit. (Exhibit) What is the outcome of this command when the ELPD is updat...
- Q379. A network engineer must configure FCoE on an interface of a Cisco MDS 9000 Series Switch. ...
- Q380. An engineer must create a scheduler configuration to create two backup jobs per day. The b...
- Q381. Refer to the exhibit. (Exhibit) An engineer installs a new Cisco UCS B-Series server. The ...
- Q382. An engineer is implementing NetFlow on a Cisco Nexus 7000 Series Switch. Drag and drop the...
- Q383. What happens to the default host firmware policy after a Cisco UCS Manager upgrade?...
- Q384. Refer to the exhibit. (Exhibit) An engineer is configuring a VSAN on the network Which opt...
- Q385. Which statement describes monitoring Fibre Channel traffic on a Cisco UCS 6332 Fabric Inte...
- Q386. Refer to the exhibit. (Exhibit) Refer to the exhibit. What happens to the broadcast traffi...
- Q387. A customer deploys a media server to distribute streaming videos to network clients. The r...
- Q388. Which two components should be checked when a Cisco Nexus 9000 Series Switch fails to boot...
- Q389. An engineer needs to make an XML backup of Cisco UCS Manager The backup should be transfer...
- Q390. Drag and drop the fields for configuring a full state backup file of the Cisco UCS Manager...
- Q391. An engineer must configure a Nexus 7000 series switch for HSRP on VLAN 100. When fully fun...
- Q392. Which data structure results from running this Python code? (Exhibit)...
- Q393. A server engineer wants to control power usage on a Cisco UCS C-Series rack server down to...
- Q394. A network engineer configures a converged network adapter (CNA) and must associate a virtu...
- Q395. A network engineer must create a script to quickly verify IP reachability for multiple hos...
- Q396. An engineer must export the Cisco UCS Manager configuration for backup purposes. The requi...
- Q397. (Exhibit) Refer to the exhibit. An engineer must configure a QoS policy that controls only...
- Q398. A bridge domain is being extended out of a Cisco ACI fabric. Between which of these compon...
- Q399. Which product includes prebuilt templates that can be used to customize fabric deployments...
- Q400. An engineer performs a set of configuration changes for the vPC domain using Session Manag...
- Q401. A customer reports Fibre Channel login requests to a cisco MDS 9000 series Switch from an ...
- Q402. Drag and drop the hyperflex characteristics from the left onto the appropriate. HyperFlex ...
- Q403. Refer to the exhibit. (Exhibit) An engineer installs a new Cisco UCS B-Series server. The ...
- Q404. An engineer must perform a nondisruptive software upgrade on a dual supervisor Cisco Nexus...
- Q405. An engineer must implement a solution that prevents untrusted DHCP servers from compromisi...
- Q406. An engineer must implement a Cisco UCS system at a customer site. One of the requirements ...
- Q407. An engineer installed a new Nexus switch with the mgm0interface in vrf management. Connect...
- Q408. Which MAC address is an HSRP version 2?
- Q409. A network engineer must implement a telemetry solution to collect real-time structured dat...
- Q410. (Exhibit) Refer to the exhibit. Which action completes the vPC domain implementation?...
- Q411. What is a feature of NFS?
- Q412. Which product includes prebuilt templates that can be used to customize fabric deployments...
- Q413. Refer to the exhibit. (Exhibit) An engineer is implementing zoning on two Cisco MDS switch...
- Q414. A customer data center is configured for distribution of user roles, call home, and NTP. T...
- Q415. An engineer mus! configure HSRP protocol on two Cisco Nexus 9000 Series Switches running a...
- Q416. An engineer must configure OSPF in the data center. The external routes have already been ...
- Q417. Refer to the exhibit. (Exhibit) Refer to the exhibit. The MDS-EDGE-Switch and MDS-Core-Swi...
- Q418. Refer to the exhibit. (Exhibit) An engineer must configure FCoE on a Cisco Nexus switch. W...
- Q419. A network architect is asked to design and manage geographically distributed data centers ...
- Q420. Refer to the exhibit. (Exhibit) Which statement describes the default gateway configuratio...
- Q421. Which behavior defines streaming telemetry as a push model in Cisco devices?...
- Q422. All logins to a Cisco Nexus 9000 Series Switch must pass through the TACACS+ server at IP ...
- Q423. An engineer configures a role for a new user in Cisco UCS Manager The role should allow th...
- Q424. Drag and drop the network assurance concepts from the left onto the corresponding benefits...
- Q425. An engineer must implement a Cisco UCS system at a customer site. One of the requirements ...
- Q426. Which two actions should be performed before upgrading the infrastructure and firmware of ...
- Q427. A content delivery network sends video traffic to a multicast distribution device where th...
- Q428. What is a characteristic of the NFS protocol?
- Q429. An engineer is configuring AAA authentication on an MDS 9000 switch. The LDAP server is lo...
- Q430. A network engineer must configure a Cisco MDS switch to use the local user database for co...
- Q431. Drag and drop the NAS and NFS concepts from the left onto the definitions on the right. (E...
- Q432. An administrator needs to configure an automated policy to shut down a link when a given t...
- Q433. Refer to the exhibit. (Exhibit) Which statement about the ERSPAN configuration in this env...
- Q434. An engineer must modify an overridden policy by changing the number of FCNS database entri...
- Q435. An engineer has a primary fabric that is named UCS-A and a secondary fabric that is named ...
- Q436. What is a benefit of using Cisco Tetration?
- Q437. Refer to the exhibit. (Exhibit) Which statement describes the default gateway configuratio...
- Q438. Refer to the exhibit. (Exhibit) Which statement about the ERSPAN configuration in this env...
- Q439. Which two statements about the process of upgrading an EPLD on a Cisco MDS 9000 series Swi...
- Q440. Which statement about the MAC address that the FCoE Initialization Protocol chooses for us...
- Q441. Refer to the exhibit. (Exhibit) Which statement about the ERSPAN configuration in this env...
- Q442. A company must security harden its Cisco UCS C-Series servers. The security policy require...
- Q443. An engineer implements SPAN configuration on an Nexus 5000 series switch. Which two comman...
- Q444. An engineer is implementing security on the Cisco MDS 9000 switch. Drag drop the descripti...
- Q445. (Exhibit) Refer to the exhibit. What is the result of executing this python code?...
- Q446. When a strict CoPP policy is implemented, which statement describes an event during which ...
- Q447. Refer to the exhibit. (Exhibit) What is a characteristic of the UUID in the service profil...
- Q448. An engineer must perform a software upgrade on a production Cisco Nexus 7000 Series Switch...
- Q449. In an FCoE environment, for which two sets of data must an interface that implements the P...
- Q450. Refer to the exhibit. (Exhibit) Which action is taken to ensure that the relay agent forwa...
- Q451. Refer to the exhibit. (Exhibit) Which two statements about the routing table of the leaf s...
- Q452. Refer to the exhibit. (Exhibit) Which result of running the command is true?...
- Q453. Refer to the exhibit. (Exhibit) A network engineer configures the VXLAN between the router...
- Q454. Which feature must be enabled to support the use of JSON and XML encodings when a Cisco Ne...
- Q455. Refer to the exhibit. (Exhibit) An engineer needs to implement a monitoring session that s...
- Q456. Drag and drop the NAS and NFS concepts from the left onto the definitions on the right. (E...
- Q457. Refer to the exhibit. Which configuration ensure that the cisco Nexus 7000 series switches...
- Q458. A network engineer must migrate a Cisco WSA virtual appliance from one physical host to an...
- Q459. (Exhibit) Refer to the exhibit. An engineer must monitor the Ethernet port and the corresp...
- Q460. An engineer is enabling port security on a Cisco MDS 9000 Series Switch. Which feature of ...
- Q461. Refer to the exhibit. (Exhibit) Which action must be taken before the maintenance policy c...
- Q462. Drag and drop the characteristics from the left onto the NAS protocols on the right. Some ...
- Q463. The Cisco Nexus switch Generic Online Diagnostics policy for a PortLoopback test requires ...
- Q464. A network engineer must perform a backup and restore of the Cisco Nexus 5000 Series Switch...
- Q465. Drag and drop the characteristics from the left onto the NAS protocols on the right. Some ...
- Q466. An engineer must recover configuration on a Cisco MDS 9000 Series switch from a previous v...
- Q467. An engineer must generate a Cisco UCS Manager backup. The backup should include all logica...
- Q468. A Cisco UCS C-Series server is installed at a data center. The server should be managed by...
- Q469. Drag and drop the hyperflex characteristics from the left onto the appropriate. HyperFlex ...
- Q470. Refer to the exhibit. (Exhibit) An engineer installs a new Cisco UCS B-Series server. The ...
- Q471. What are two types of FC/FCoE oversubscription ratios? (Choose two.)...
- Q472. (Exhibit) Refer to the exhibit. A network engineer is configuring the Smart Call Home feat...
- Q473. A network engineer must configure a power redundancy policy on a Cisco UCS C-Series Rack S...
- Q474. Port security is enabled on a Cisco MDS 9000 series Switch. Which statement is true?...
- Q475. (Exhibit) Refer to the exhibit An engineer must provision a VXLAN deployment The OSPF has ...
- Q476. Refer to the exhibit. (Exhibit) What be connected to clear the HA NOT READY status?...
- Q477. An engineer must configure a control plane policy on a Cisco Nexus 9000 Series Switch that...
- Q478. An engineer must perform a software upgrade on a production Cisco Nexus 7000 Series Switch...
- Q479. An engineer is implementing NPV mode on a Cisco MDS 9000 Series Switch. Which action must ...
- Q480. The engineer must configure SPAN on a cisco Nexus 5000 Series switch to get a capture of t...
- Q481. Host 1 is in VLAN 100 located is DataCenter 1 and Host2 is in VLAN200 located in DataCente...
- Q482. Refer to the exhibit. (Exhibit) Refer to the exhibit. What is the result of executing this...
- Q483. An engineer must suggest a deployment model for a newly developed application. The enginee...
- Q484. Which feature must be enabled to support the use of JSON and XML encoding when a Cisco Nex...
- Q485. (Exhibit) Refer to the exhibit. An engineer needs to implement streaming telemetry on a ci...
- Q486. A company plans to migrate some of its services to the cloud. The company does not want to...
