Join the discussion
Question 1/45
The minimum design criteria for the design of a new sprinkler system in a residential occupancy, with noncombustible concealed spaces, in an NFPA 13 based design is how many residential sprinklers and what density?
Correct Answer: C
The minimum design criteria for a new sprinkler system in a residential occupancy, considering noncombustible concealed spaces and based on NFPA 13, would typically involve 4 sprinklers at a density of
0.10 gpm/ft². This provides a baseline level of fire protection suitable for residential settings.
References: NFPA 13 provides design criteria for sprinkler systems in various occupancies, including residential, with specific guidelines for sprinkler quantity and density.
0.10 gpm/ft². This provides a baseline level of fire protection suitable for residential settings.
References: NFPA 13 provides design criteria for sprinkler systems in various occupancies, including residential, with specific guidelines for sprinkler quantity and density.
Add Comments
- Other Question (45q)
- Q1. The minimum design criteria for the design of a new sprinkler system in a residential occu...
- Q2. What is the maximum distance an underground main can be installed under the building to th...
- Q3. Contract specifications call for a water mist fire protection system in the mechanical roo...
- Q4. Which of the following is a mandatory referenced publication in NFPA 13?...
- Q5. What standard applies for underground malleable iron threaded fittings of Class 150?...
- Q6. A sprinkler with a blue glass bulb represents a temperature classification of...
- Q7. If a jockey pump start point is set at 165 psi (11.4 bar), the jockey pump stop point shou...
- Q8. Using the Hazen-Williams formula, determine the friction loss in 150 ft (45.7 m) of 1 in. ...
- Q9. When field acceptance testing a fire pump with a variable speed pressure limiting control,...
- Q10. A fire pump must produce at least what percentage of its rated pressure at the 150% flow c...
- Q11. What is the thrust force on an 8 in. (205 mm) ductile iron 90° bend with a water test pres...
- Q12. If a 2,000 ft2 (186 m2) design area is selected, what design density is required for stand...
- Q13. Annual testing for a 1,500 gpm (5,677 L/min) at 80 psi (1.4 bar) fire pump supporting an a...
- Q14. What is the minimum calculated design area for a dry system protecting a light hazard atti...
- Q15. What is the maximum allowable water delivery time for a dry pipe system protecting an Ordi...
- Q16. Which Occupancy Classification is defined as occupancies or portions of other occupancies ...
- Q17. A new office area located inside a warehouse space is being designed as a light hazard occ...
- Q18. What is the minimum temperature rating of ceiling sprinklers in roll paper stored at 15 ft...
- Q19. What is the minimum flow rate required for the most hydraulically remote Class I standpipe...
- Q20. A sprinkler system is to be designed for an area containing a diesel engine drive fire pum...
- Q21. The minimum diameter of a private service main to a hydraulically calculated sprinkler sys...
- Q22. A sprinkler system employing automatic sprinklers that are attached to a piping system tha...
- Q23. A 4 in. (102 mm) nominal diameter Schedule 10 sprinkler main is to be supported from the s...
- Q24. A five story building is proposed, with the ground floor being used for retail space and t...
- Q25. An existing building with an existing sprinkler system is constructed with 26 in. (660 mm)...
- Q26. Extra high temperature sprinklers should be tested every...
- Q27. What is the maximum percentage a fire pump's rated pressure is permitted to produce at chu...
- Q28. What is the pressure at a sprinkler head with a flow of 33 gpm (125 L/min) with a K-factor...
- Q29. A restaurant service area has an 18 ft (5.5 m) high T-Bar ceiling throughout. Using quick-...
- Q30. For an Ordinary Hazard with a design area of 1,500 ft2 (140 m2), what is the minimum numbe...
- Q31. What is the minimum design criteria to protect an exposed nonexpanded Group A plastic stor...
- Q32. What is the required minimum design density/area for protection of floor stacked, idle woo...
- Q33. High piled storage includes all storage of Group A plastic in excess of what height?...
- Q34. What is the required density for a warehouse with 10 ft (3 m) deep multiple-row racks with...
- Q35. In a dry pipe system protection of an Extra Hazard Group I occupancy, how many remote spri...
- Q36. What piping material is acceptable for the suction and discharge piping pressure maintenan...
- Q37. A 4.2 K-factor sprinkler must deliver 17 gpm (692 mm/min). What pressure is required?...
- Q38. When welding is performed on sprinkler piping, which of these shall apply?...
- Q39. The contract document states that the fire sprinkler system must be capable of protecting ...
- Q40. How much water would be required to be stored for a system with a demand of 4,300 gpm (16,...
- Q41. Assuming that the sprinkler is listed for such use, what is the maximum deflector distance...
- Q42. A light hazard wet pipe sprinkler system using quick-response sprinklers with a 18 ft (5.5...
- Q43. The purpose of the owner's certificate is to
- Q44. Which of the following should be considered when choosing an occupancy?...
- Q45. What is the maximum floor area that can be protected by a single ordinary hazard sprinkler...
